除尘，曝气TEKA

TEKA AIRTECH P18

Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18.

The main
areas of application for the systems are industrial plants/welding shops where it is
where it is not possible to realize spot extraction
point extraction or where point extraction
is not sufficient to maintain clean
air on the shop floor.
Side-mounted ducts with point
capture point sucks in contaminated air
air and lead it to the filter section.
Here, contaminants in the form of fine
particles cover the surface of the filter
patron filter.
An administered pulse of compressed air
cleans the cartridge filters, automatically
at the required intervals. After the impact of the compressed air, the particles
collected on the surface of the filters break off
off and fall into the dust tank.
The cleaned air is returned to the work room through individually adjusted
long-range nozzles. At the same time
ejection of the purified air directs the contaminated air of the hall towards the
toward the extraction channels.

Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device.
Low demand for compressed air thanks to the system
"Power-Spray"

The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012-
1 or DIN EN ISO 21904-1/-2 and approved
for welding fume class W3 as a
permanent local extraction device
of welding fumes.

Parameters:

Capacity - 18 000 m3/h
motor power - 11Kw
vacuum - 2250 Pa
Filtration area - 324 m2 ( 9 filter cartridges 36m2 each)
Gsdpsib Dadsfx Afpeuk
Fan in sound-absorbing housing
Control cabinet with electrical documentation
Noise level - 72 dB

Year of production - 2010

Dimensions:
Height - 5.00m
Base width - 1.44m x 1.44m
Width with outlet channels - 8.5m
Total weight about 2400 kg

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。