电动低位搬运车Still
EXH-S 25
技术细节
- 额定载荷:
- 2,500 千克
- 空载重量:
- 605 千克
- 总高度:
- 1,700 毫米
- 总长度:
- 2,300 毫米
- 总宽度:
- 800 毫米
提供
- 位置:
- Hessen, 德国
– 距离：约 9,443 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€195.00 (约束性)
免费
描述
No reserve price - guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Rated capacity: 2,500 kg
MACHINE DETAILS
Charger: HFX 1600/3200
Operating hours: 1,666 h
Dimensions & Weight
Dimensions (L x W x H): 2,300 x 800 x 1,700 mm
Unladen weight: 605 kg
EQUIPMENT
Charger
PIN unlock
The following technical specifications are from the manufacturer's data sheet. The seller does not assume any liability for these.
Load center: 600 mm
Distance from load wheel axle to load carrier surface: 975 mm
Wheelbase: 1,478 mm
Wheels
Tyres, drive side / load side: Rubber + Polyurethane / Polyurethane
Drive wheel dimensions: Ø 230 x L 90 mm / Ø 230 x L 100 mm
Load wheel dimensions: Ø 85 x L 85 mm
Load wheel dimensions, bogies: Ø 85 x L 60 mm
Number of wheels, drive side / load side: 1X + 2 / 2
Number of wheels, drive side / load side with bogies: 1X + 2 / 4
Track width, drive side: 502 mm
Track width, load side: 380 mm
Dimensions
Lift: 125 mm
Steering arm height in driving position: min. 1,030 mm / max. 1,115 mm
Height at fork tips: 86 mm
Distance to load carrier surface: 1,170 mm
Fork arm dimensions: 55 / 165 / 1,150 mm
Outer fork arm distance: 520 / 540 / 560 / 680 mm
Ground clearance at center of wheelbase: 35 mm
Load dimensions: 800 x 1,200 mm
该广告为自动翻译，可能存在翻译错误。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 广告编号:
- A21814343
- 参考编号:
- AUC-2604310
- 更新:
- 最近更新时间为 29.04.2026
- 独家优惠:
- 仅在拍卖中提供
参观
Hessen StillEXH-S 25
Hessen TrumpfTruBend 5170 + BendMaster
Hessen StillEXH-S 20
Hessen JungheinrichETV 216i
Hessen TRUMPFCell 1100 (L 35)
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我们检查什么？
检查
营业执照或商业登记摘录
检查经销商的
邮寄地址
银行账户信息验证
主电话号码的
电话
可接通性验证
企业信用报告
不得显示任何负面特征
买家的投诉
可能导致认证标志被撤销这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。