自卸半挂车

STAS Agrostar 51,8 cbm

Kingpin load: National 12 t
Axle load: National 8 t
Axle spacing: 1310-1310 mm
Fifth wheel height: 1150 mm
Chassis width: 1400 mm
Internal height: Front 2165 mm
Internal height: Rear 2165 mm
Overall width: 2550 mm
Wheelbase: 6800 mm
Overall length: 10656 mm
Chassis material: Aluminum
Tires: 385/65R22.5
Loading length: 9665 mm
Axles: SAF
Brake type: SAF - SBS 2220
Offset: 120
Option: 1st axle with lift axle and traction aid
Activation of traction aid: Via a button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times.
Brake pad wear indicator: Not connected
Tire pressure monitoring system (Tire Pilot) Without
Tire pressure monitoring: Wabco Trailerpulse
ECAS air suspension with raising and lowering valve
Air suspension lowering: Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis
Pneumatic coupling head: European Palm coupling
Chrome wheel nut caps with STAS logo
Landing gear: Aluminum drop legs mounted at the front of the chassis, with individual controls on both sides, support force 20 t/P
Underrun protection control: Manual
Towing eye: 1x in the direction of travel
Underrun protection mud flaps: Black with STAS logo
Underrun protection cover: Handle on the underrun protection
EBS control panel: Control panel: In the direction of travel, in front of the axles
Toolbox position: On the left in the direction of travel, in front of the axles: Plastic
Toolbox dimensions: Left in front of the axles: 860 x 520 x 500
Type of fender: Domar STAS with white line
Number of mud flaps on the fender 2x
Mudguard type: Clear Pass
Lighting manufacturer: Aspöck
Lighting type: ECOLED II
Work lights (switch operated)
Position of work lights (switch operated)
2x LED reversing lights, front, left and right, in the area of the landing gear
Bljdpfx Aouar Amjgneh
Tilt cylinder manufacturer: Hyva
Tilt cylinder type: Hydraulic cylinder with large casing
Tilt cylinder model: Hyva - FC 169
Tilt cylinder stroke: 7130
Tilt cylinder max. pressure: 250
Surface treatment of cylinder stages: Standard surface treatment
Hydraulic coupling: Swivel coupling
Hydraulic coupling - size 1
Hydraulic coupling - gender: Female
Hydraulic coupling - hose 2,500 mm
Smartboard
Aluminum leaning ladder 3 m
Left-hand ladder attachment for rear entry: With hook for hanging
Position of broom and shovel holder: With 3 holders each, on the chassis on the left in the direction of travel
Loading pressure gauge Ø 100 mm - mounted on the front of the chassis
With two Plastic wheel chocks including bracket
Chassis safety device - body rubber pads
Air and electrical console, centered in the direction of travel, with boom
End wall inclination (°) 90
Rear wall inclination (°) 90
Rear wall type combi-door
Inner lower chord profile inclination (°) 90
Floor 8 mm aluminum - 110 Brinell
Position of rubber pads below the floor cross members
End wall 4 mm (aluminum)
Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick
Rear wall aluminum
Combi-door type 1/2 - 1/2 with pivoting door end cross member
Door leaf opening: Right door leaf opens first (STAS manufacturer's choice)
Door end cross member: Pivoting design
Hinge type: With double door hinge (double-joint hinge)
Slider: Rectangular design, standard
Slider position 2 sliders with operating handles, one each on the left and right in the direction of travel.
Securing the open door leaves. The

该广告为自动翻译，可能存在翻译错误。