立式加工中心

Starrag HEC 400 F

For sale is a Starrag HEC 400 F 4-axis machining center, which was fully inspected and overhauled at the Starrag factory in 2022. All relevant components were checked and, where necessary, adjusted or replaced. Since its installation in 2022, the machine has been in operation at our facility and is currently under power in ongoing production. It is in well-maintained technical condition and has been regularly serviced.

Technical Highlights
- Starrag HEC 400 F – 17211, 4-axis machining center for milling / drilling / turning
- Control: Siemens Sinumerik 840 D solution Line with NCU710 and PLC integration
- Spindle: HSK-A63 motor spindle, speed range 50 – 18,000 rpm, torque 130 Nm (25% duty cycle), power 32.4 kW / 24 kW (100% duty cycle)
- Factory inspection in Chemnitz 2022: all assemblies checked, adjusted, and replaced as necessary
- Direct drive CNC rotary table, 80 rpm, 400 Nm drive torque, tangential moment 3,000 Nm
- Siemens spindle diagnostics & remote diagnostics (Teamviewer)
- Energy-efficient system with regeneration and standby mode for energy savings

Working Area & Dimensions
- Travel paths (X/Y/Z): 650 / 650 / 680 mm
- Pallet size: 400 × 500 mm with 57 × M12 threads
Isdpfxjx H Idks Abfstr
- Max. workpiece height: 850 mm • Max. pallet load: 500 kg
- Pallet changer: 2 pallets – automatic, changeover time approx. 8 s
- Tool magazine: 60 tool pockets (chain magazine) • Chip-to-chip time 3 – 4 s
- Chip conveyor: scraper belt conveyor with vacuum gap sieve, discharge height 1,050 mm
- Machine dimensions (L × W × H): approx. 5,150 × 2,800 × 3,025 mm
- Machine weight: approx. 11,500 kg
- Noise emission: ≤ 80 dB(A) according to EN ISO 3744

Additional Equipment
- Clamping hydraulics, 6-channel (90 bar) at setup and working positions
- Increased spindle torque (130 Nm) for heavy-duty machining
- Torque support with axial support
- Coolant system: connection to central supply including return and temperature compensation
- Increased coolant pressure to 80 bar through spindle center
- Optical probe Renishaw OMP60 including Siemens measuring cycles
- Tool breakage detection (mechanical, parallel to main time)
- Pallet sequence operation + crane infeed/outfeed (software)
- Signal tower (4-color) for machine status indication
- Working area/machine equipment: shower, rinse gun, vortex nozzle, emission extraction interface, foot pedal blow-off nozzle
- Documentation: fully digital (PDF)

Operating hours / machine run times
- Power-on hours approx. 27,412 h (as of Oct 2025)
The counter runs whenever the machine is powered on – including during setup, maintenance, or standby periods.
- Spindle operating time total 9,956 h

Special features
- OPTIONAL: with perfect postprocessor and CAM software TOP Solid (at extra cost)
- Under power – demonstration possible at any time
- Direct from production – not a dealer sale
- Complete technical documentation available
- Support for dismantling, loading, and transport possible (for a fee)

The tool holders and vise visible in the photos are not included in the offer, but can be purchased separately on request.

Price €140,000 net, negotiable for quick completion.

All information has been prepared to the best of our knowledge and belief. Subject to prior sale, error, and change.

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。