心轴弯曲机Sommer Maschinenbau GmbH
S45
心轴弯曲机
Sommer Maschinenbau GmbH
S45
EXW 起拍價 不包含增值稅
€48,000
製造年份
2023
狀況
二手
位置
Elz 

顯示圖片
显示地图
机器数据
价格和位置
EXW 起拍價 不包含增值稅
€48,000
- 位置:
- Hinter dem Entenpfuhl 6, 65604 Elz, DE
撥打
优惠详情
- 產品ID:
- A16219945
- 最後更新:
- 於 08.10.2025
描述
Mandrel Bending Machine S4501
----
For the production of pipe geometries with bending radii from 1.5xD
→ Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²)
→ Maximum bending capacity: pipe 30 x 30 x 3 mm
→ Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²)
→ Total connected load 3 kW
→ Pipe insertion length approx. 1.5 m
Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system.
Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software.
Standard equipment:
→ 1.5 kW servo drive for the bending axis
→ Adjustable speed
Iodpfx Afetr U Hle Aoih
→ Left-hand bending direction
→ Bending angle resolution 0.1°
→ Max. bending radius 120 mm
→ Bending shaft diameter 50 mm
→ Feed servo drive
→ Rotation servo drive
→ Three-jaw chuck for locking the tube in the carriage
→ Pneumatic tool retraction
Hydraulics:
→ Hydraulic tube clamping with adjustable clamping pressure
→ Programmable early mandrel retraction
PLC control:
→ 10" color touchscreen
→ ETH 10/100, X2X Link, 2xUSB
→ Foot switch operation
→ Data transfer via LAN or USB network
→ Material database
Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle.
Power consumption: 400V 16A
Dimensions: L: 2.3 m x W: 1m x H: 1.4m
Weight: approx. 1200 kg
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
----
For the production of pipe geometries with bending radii from 1.5xD
→ Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²)
→ Maximum bending capacity: pipe 30 x 30 x 3 mm
→ Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²)
→ Total connected load 3 kW
→ Pipe insertion length approx. 1.5 m
Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system.
Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software.
Standard equipment:
→ 1.5 kW servo drive for the bending axis
→ Adjustable speed
Iodpfx Afetr U Hle Aoih
→ Left-hand bending direction
→ Bending angle resolution 0.1°
→ Max. bending radius 120 mm
→ Bending shaft diameter 50 mm
→ Feed servo drive
→ Rotation servo drive
→ Three-jaw chuck for locking the tube in the carriage
→ Pneumatic tool retraction
Hydraulics:
→ Hydraulic tube clamping with adjustable clamping pressure
→ Programmable early mandrel retraction
PLC control:
→ 10" color touchscreen
→ ETH 10/100, X2X Link, 2xUSB
→ Foot switch operation
→ Data transfer via LAN or USB network
→ Material database
Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle.
Power consumption: 400V 16A
Dimensions: L: 2.3 m x W: 1m x H: 1.4m
Weight: approx. 1200 kg
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
您的广告已成功删除
发生错误