封边机

SCM Stefani One 108 – vollautomatische Kante

New price including transport and installation approx. €850,000 net.

The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment.

Technical data:
Manufacturer: SCM Stefani
Type: One 108 Cell
Year of construction: 2019
Operating hours: approx. 5,600
Feed speed: 10–40 m/min
Maximum speed with pickback: 30 m/min
Workpiece length: approx. 250–3,000 mm
Workpiece width: approx. 130–1,200 mm
Workpiece thickness: 10–60 mm
Maximum workpiece weight pickback: 80 kg
Machine length edge banding machine: approx. 11,550 mm
Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm
Working height: approx. 970 mm
Connection: 400 V / 50 Hz with neutral conductor

Workpiece feed:
Motorized feed roller table
Easy Order BN+ automatic workpiece feed
Automatic alignment for longitudinal and transverse processing
Servo-controlled workpiece centering
Automatic adjustment to different workpiece dimensions
Large lateral workpiece support

Edge and glue system:
Nordson AltaPUR 4HO PUR hot melt unit
Melt-on-demand technology
Melting capacity up to approx. 6 kg/h
SGP glue reservoir with CNC-controlled glue metering
Additional interchangeable SGP glue reservoir
Separate preheating trolley for one glue reservoir
Workpiece edge preheating
Automatic positioning of the edge guide and pressure rollers
12-position vertical edge magazine with automatic edge changing
Processing of roll material up to 3 mm
Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2

Machining units:
Pre-milling unit RT-H/RT-X with 2 × 4 kW
Electronic positioning of the pre-milling unit
Trimming unit YU/SP-1000 with automatic saw blade inclination
Flush-cutting and pre-milling unit R-E
CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit
Processing of thin edge and R1, R1.5 and R2
Round 4 four-motor corner rounding unit
Automatic selection of four profiles
MX80 HSK milling unit with 10 kW
CNC-controlled horizontal and vertical positioning
Automatic pivoting from 0–90°
Suitable for continuous or recessed grooves on the top, bottom and workpiece edge
CNC-controlled RCS-E Multiedge radius drawing blade unit
Edge sanding unit GT with oscillating sanding belt
Two glue seam drawing blade units RCA/2C
Polishing unit SP/F with oscillating Riepe polishing pads

Spraying devices:
Release agent spraying device at the machine infeed
Antistatic and coolant spraying device
Spraying device for sensitive or foiled edges
Cleaning agent spraying devices for the glue seam drawing blades
Spraying device for the first pressure roller

Automatic pickback return:
Gantry return system with three servo-controlled axes
Workpiece pick-up via vacuum gripper
Automatic rotation by 0°, 90°, -90° and 180°
Godpsz Aquhofx Ap Eoug
Automatic return to the machine infeed
Up to 10 return cycles per minute without rotation
Up to 9 return cycles per minute with 90° rotation
Motorized conveyor belts
Additional second unloading station
Central control via the machine control system

Location: Netherlands
Inspection: possible after prior appointment
Condition: professionally disassembled and stored
Availability: short notice
Price: on request

The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

该广告为自动翻译，可能存在翻译错误。