Precision turning lathe

Schaublin 102

Completely overhauled on a new workbench, with new paint and belt guard, and a new headstock.

Inventory No. 2240050, machine including:

1 NEW workbench 2000x800 mm with blue Urphen top 2000x800x50 mm
     1 leg, 1 B750 cabinet with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200

1 bench for overhead control

1 W-20 tailstock with geared reducer, complete with tightening key, overhauled
1 overhauled cross slide

1 overhauled aligned steady rest
1 380V/50Hz/3ph motor, 2 speeds 720/1420 rpm - 0.9/0.6 HP
1 tensioner pulley with pulley and belt

1 W-20 dead center
1 set of 37 W20 collets
1 1x3 jaw chuck Ø 100 mm on W-20 flange and additional jaw sets

1 TRIPAN tool holder set including:
-1 type 111S turret with stud
- 2 tool holders 131
- 1 tool holder 131b
Bjds Ahxhiopfx Appjlp
- 1 double tool holder 132

1 self-centering drilling chuck, capacity 1-13 mm on CM2 taper
1 CM2 dead center

TECHNICAL CHARACTERISTICS:

Capacities:
- center height 102 mm
- distance between centers, W-type headstock, standard 470 mm
- distance between centers, W headstock with reducer 375 mm
- diameter allowed above the bed 200 mm
- diameter allowed above the cross slide 120 mm
Bench:
- height x width x length 160x100x1000 mm
cast iron bench with rectified dovetail profile
Headstocks:
- spindle nose for collets W-20
- bar passage through collet 14.5 mm
- headstocks with reducer, ratio 1:5
Cross slides:
- travel of longitudinal tool slide 90 mm
- travel of transverse tool slide 100 mm
- tool dimensions 12 x 12 mm
Tailstocks:
- internal taper of tailstock spindle Morse 2
- spindle travel, controlled by screw and handwheel 80 mm

The technical specifications are provided without guarantee, subject to errors and omissions.

该广告为自动翻译，可能存在翻译错误。