干燥箱SAT
干燥箱
SAT
起拍價 不包含增值稅
€15,000
製造年份
2014
狀況
二手
位置
Bron 

顯示圖片
显示地图
价格和位置
起拍價 不包含增值稅
€15,000
- 位置:
- 35 Ave de la République, 69500 Bron, France

撥打
优惠详情
- 產品ID:
- A20683210
- 最後更新:
- 於 05.12.2025
描述
Offer Plan: No. A8 28 441
Internal dimensions: width 1,500 mm – height 1,740 mm – length 2,500 mm
Working temperature: 380 to 420°C.
Maximum operating temperature: 450°C / air.
TEMPERATURE HOMOGENEITY
Homogeneous volume dimensions: width 1,300 mm – height 1,440 mm – length 2,200 mm
Temperature homogeneity guaranteed: ±5°C within the homogeneous volume when it is at an average temperature of 420°C. Measurements taken in the empty chamber under stabilized thermal conditions. Slightly higher temperatures are expected near the walls. At floor level, the temperature will be approximately 80°C. A standard concrete floor is sufficient.
FLOOR
Constructed from aluminized steel sheet placed over 60 mm thermal insulation. This floor is equipped with embedded running rails (supplied by the customer).
ACCESS DOOR TO THE INTERNAL VOLUME
Number of doors: 1
Type: double-leaf, hinged on the right.
DOOR SEAL
Refractory fiber gasket.
VENTILATION
Horizontal air circulation.
Number of units: 2.
Type: centrifugal fan.
Construction: mild steel.
Individual air flow: 6,600 m³/h.
Drive motor: brand A.B.B. or LEROY SOMER.
HEATING
Type: natural gas with combustion gas recirculation.
Total power: 90 kW.
Number of heating zones: 1
Burner type: modulating burner by WEISHAUPT, compliant with EN 746-2 standard.
TEMPERATURE CONTROL
Number of controlled zones: 1.
Controller: EUROTHERM microprocessor-based PID controller.
Safety: Torque break safety device.
Relay output for contactor control.
Cabinet equipment includes:
- main switch
- multiposition switches to prevent incorrect operation during start-up
- transformer for control circuits
- fuses for power and control circuits
- contactors for the heating system
Csdpox Dhrmofx Afteaa
- circuit breakers and contactors for motor control
- panel switches
- indicator lights
- control and regulation instruments
- CE marking will be affixed to the machine (subject to compliance with safety instructions)
- A certificate of conformity or incorporation will be supplied by SAT.
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
Internal dimensions: width 1,500 mm – height 1,740 mm – length 2,500 mm
Working temperature: 380 to 420°C.
Maximum operating temperature: 450°C / air.
TEMPERATURE HOMOGENEITY
Homogeneous volume dimensions: width 1,300 mm – height 1,440 mm – length 2,200 mm
Temperature homogeneity guaranteed: ±5°C within the homogeneous volume when it is at an average temperature of 420°C. Measurements taken in the empty chamber under stabilized thermal conditions. Slightly higher temperatures are expected near the walls. At floor level, the temperature will be approximately 80°C. A standard concrete floor is sufficient.
FLOOR
Constructed from aluminized steel sheet placed over 60 mm thermal insulation. This floor is equipped with embedded running rails (supplied by the customer).
ACCESS DOOR TO THE INTERNAL VOLUME
Number of doors: 1
Type: double-leaf, hinged on the right.
DOOR SEAL
Refractory fiber gasket.
VENTILATION
Horizontal air circulation.
Number of units: 2.
Type: centrifugal fan.
Construction: mild steel.
Individual air flow: 6,600 m³/h.
Drive motor: brand A.B.B. or LEROY SOMER.
HEATING
Type: natural gas with combustion gas recirculation.
Total power: 90 kW.
Number of heating zones: 1
Burner type: modulating burner by WEISHAUPT, compliant with EN 746-2 standard.
TEMPERATURE CONTROL
Number of controlled zones: 1.
Controller: EUROTHERM microprocessor-based PID controller.
Safety: Torque break safety device.
Relay output for contactor control.
Cabinet equipment includes:
- main switch
- multiposition switches to prevent incorrect operation during start-up
- transformer for control circuits
- fuses for power and control circuits
- contactors for the heating system
Csdpox Dhrmofx Afteaa
- circuit breakers and contactors for motor control
- panel switches
- indicator lights
- control and regulation instruments
- CE marking will be affixed to the machine (subject to compliance with safety instructions)
- A certificate of conformity or incorporation will be supplied by SAT.
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
您的广告已成功删除
发生错误

