压力制动器

SafanDarley E-Brake 200-4100

SAFANDARLEY E-Brake press brakes have an electric drive.
Lenze servomotors controlled by inverters from the same company allow for fast and reliable operation of the system.

Additionally, the machine consumes electricity mainly when the slider goes down.
Tsdovpqpijpfx Ai Tsd

The slider returns using the force resulting from the spring package on both sides of the machine.

When the machine is not in use, it does not consume electricity because there is no pump in the system as in hydraulic presses.

Electricity consumption is estimated at 70% lower than in conventional hydraulic presses.
Servo-electric press brake SAFANDARLEY model E-Brake
Pressure 3000 kN (300 tons)
Slider stroke 300 mm
Opening Q=690 mm
Upper beam exit speed 90 mm/s
Upper beam accuracy +/- 0.01 mm
CNC controlled axes:
Y1-Y2 - upper beam control with the possibility of using skews
X - bumper beam exit (gives the dimension of the bent element). Very high positioning accuracy. delta X - independent bumper finger used for skewing
R - bumper beam top/bottom, stroke 200mm
Z1-Z2 - bumper fingers sliding along the bending line (speed 2000mm/s)
Max bumper finger speed 350mm/s
Max bumper finger range (third reference point range in X axis) 1000mm
R axis bumper range 200mm
Connected power 22kW (controlled by inverter)
Weight 17,000kg
Machine width 5,300 mm
Machine depth 1,950 mm
Machine height 2,810 mm
Power supply 3/N/PE 50Hz – 400/230V
Servo-electric drive (without hydraulic system)
Drive transmission by means of belts

该广告为自动翻译，可能存在翻译错误。