液压闸式剪板机Safan
M-Shear
技术细节
- 作业宽度:
- 3,100 毫米
- 切削角（最小）:
- 0.5 °
- 切割角度（最大）:
- 3 °
- 钢板厚度（最大）:
- 13 毫米
- 铝板厚度（最大）:
- 16 毫米
- 后挡规速度 R轴:
- 50 毫米/秒
提供
- 位置:
- Woiwodschaft Schlesien, 波兰
– 距离：约 8,805 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€1,000.00 (约束性)
免费
描述
TECHNICAL DETAILS
Sheet thickness steel (max.): 13 mm
Sheet thickness aluminium (max.): 16 mm
Cutting length (max.): 3,100 mm
Cutting angle: 0.5° - 3°
Thickness of the cut sheet (450 N/mm²): 1 - 13 mm
Backgauge speed R-axis: 150 mm/s
Backgauge travel distance Z-axis: 1,000 mm
Length of front support arms (from blade): 1,500 mm
Rear bumper speed: 125 mm/s
Number of cuts at full length: 18/min
Number of cuts at minimum length: 46/min
Min. cutting gap: 0.04 mm
Max. cutting gap: 0.5 mm
Positioning accuracy: +/-0.03 mm
MACHINE DETAILS
Type of incoming current: Three-phase
Main power supply: 3/N/PE - 50Hz - 400/230V
Motor power: 30 kW
Total weight: 12,500 kg
Overall length: 4,000 mm
Overall width: 4,500 mm
Overall height: 2,000 mm
EQUIPMENT
- Documentation/manual
- Finger guard
- Safety light curtain
DESCRIPTION
SafanDarley guillotine shears are equipped with unique technology. The hydraulic control is managed electronically during the cutting process. The amount of power used with this type of solution is calculated according to the thickness
of the material to be cut.
The backlash-free ball screw ram allows positioning accuracy of +/-0.03 mm, while the minimal gap of 0.04 mm ensures a quality cut in materials from 0.5 mm up to the maximum sheet thickness of the machine. The worktable design enables a straight cut even under high load.
The automatic selection of gap and cutting angle according to the material type and thickness, as well as the compensation of the bumper position, allow
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A19892890
- 參考編號:
- AUC-2508159
- 最後更新:
- 於 02.09.2025
- 独家优惠:
- 仅在拍卖中提供
参观
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。