加工中心Saeilo
MMV-810 S
技术细节
- X轴行程:
- 810 毫米
- Y轴行程:
- 410 毫米
- Z轴移动距离:
- 500 毫米
- 工作台宽度:
- 900 毫米
- 桌面长度:
- 400 毫米
- 主轴速度（最大）:
- 10,000 转/分
- 刀库刀位数量:
- 24
提供
- 位置:
- Oberösterreich, 奥地利
– 距离：约 9,286 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- EXW
免费
描述
No reserve price - guaranteed sale at the highest bid!
2024 service had
TECHNICAL DETAILS
X-axis travel: 810 mm
Y-axis travel: 410 mm
Z-axis travel: 500 mm
spindle tip to table: 115 mm
spindle center to column: 425 mm
Table
Table size: 900 x 400 mm
T-slots: 14 x 3 x 125 mm
Max. table load: 300 kg
Table height: 815 mm
feed rate
Rapid X,Y axis: 36,000 mm/min
Rapid Z-axis: 30,000 mm/min
spindle
Spindle taper: ISO SK40
Spindle speed: 10,000 rpm
engines
Spindle motor power: 10 kW
Servo motor power X,Y,Z: 2.3 / 2.3 / 3.3 kW
tool changer (ATC)
Type: Arm
Tool capacity: 24 tools
Max. tool diameter: Ø 150 mm (with free adjacent spaces)
Max. tool weight: 7 kg
Max. tool length: 300 mm
machine precision
Positioning accuracy: ±0.005 / 1000 mm
Repeatability: ±0.003 / 1000 mm
MACHINE DETAILS
Air pressure: 7 kg/cm²
Energy requirement: 20 kW
Machine dimensions (LxWxH): 3600 x 2000 x 2500 mm
Machine weight: 3,500 kg
tension and energy
Voltage: 3-phase, 380-400 V AC
Frequency: 50/60 Hz
Total power: 20 kW
Cable specifications: Main voltage and earth cable min. 8 mm²
EQUIPMENT
- Electronic handwheel
- Fully enclosed splash guard
- Powerful AC spindle motor
- Steel telescopic covers for X, Y and Z axes
- Halogen work lamp
- Automatic central lubrication system
- control lamp
- spindle blow-out device
- Screws and feet for leveling
- Manual and parts list
- Machine is sold without vice and tools
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A18362721
- 參考編號:
- AUC-2501103
- 最後更新:
- 於 28.01.2025
- 独家优惠:
- 仅在拍卖中提供
参观
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。