数控 VTL，2 个头，2 个磁盘杂志

REM SCR 50 CNC 2S

Vertical Turning center SCR 50 2S
Turning Center’s Specifications
Nominal Turning Envelope
Faceplate Diameter 4.500 mm

Machining Diameter

Optional 4.700 mm – with the CE Enclosure - 5.300 mm ( without )

Machining Heights 2.100 mm /3500 mm
Work Piece Weight 30.000 kg / 50T
Nominal Turning Travels
X & U - Axis Ram Carriage
From -100 mm
To 2.600 mm
Z and W - Axis Ram 1.250 mm / 1700 mm


Faceplate Diameter
4.500 mm/Normal face plate with T-slots

Jaw chucks height 200 mm
Work Table Speed: 0-50rpm


Power Continuous S1 96 kW / 2X75kW

Torque Continuous S1 130,000 Nm / 320,000Nm
Turning main drive mechanism Gear box reducer ZF and belt transmission
Z & W - Axis Ram
Turning Ram - Left and Right side
Ram Size 250 by 250 mm or bigger
Tool holder type KM 63

Tool Storage (ATC)
No. of Tool storage 2 Tool Storage, left and right sides
Stations qty 12 stations per each tool storage
Stations type Turning toolholder
ATC turning capabilities:
Maximum Singular Tool Weight – turning toolholder
Maximum tool weight 50 kg
Maximum tool size 250 x 150 mm X 700 mm
Axes Drives
X and U - Axes Ram Carriage
Power Continuous S1 6.5 kW
Thrust Continuous S1 45,000 N
Z-Axis Ram
Power Continuous S1 6.5 kW
Thrust Continuous S1 45,000 N
Axes Rates
X, U And Z, W-Axes Feed Rates 0.02 to 6,000 mm/min
X, U And Z, W-Axes Rapid Rates 6,000 mm/min
Coolant System
Coolant Tank Capacity 2,000 L
Coolant Pressure / Flow Rate:
Cgjdpfx Agehh Dnxoqsr
-external coolant (turning)
-internal

Filtration unit:
-type
-accuracy
6 bar at 100 LPM
40 bar at 60 LPM



Chips conveyor
Conveyor type Hinged (Hardox material)
Width The conveyors should have a width of 600 mm

CNC Control
-type
-producer Sienumerik One Siemens / Fanuc oiF