带有卷材送料的热成型机

QS VF-20-08-02

Used for the production of door liners by thermoforming. Year of manufacture: 2003

General

Maximum roll diameter: 1200 mm

Maximum roll width: 850 mm

Minimum roll width: 570 mm

Sheet loading height: 1750 mm
Hjdpszumnzsfx Af Tonr

Sheet feeding height: 1750 mm

Discharge height of thermoformed product: 1750 mm

Machine overall dimensions: See layout drawing

Roll Unwinding Station

Sheet loading: Manual

Roll change: Automatic (pneumatic)

Sheet pulling: Motorized

Heating Station

Format change: Motorized

Format change stroke length: 500 mm

Oven emptying in emergency: Automatic (pneumatic)

Upper panel radiators: 134 × 300 W + 45 × 600 W

Upper panel radiator power: 67,200 W

Lower panel radiators: 112 × 600 W

Lower panel radiator power: 67,200 W

Forming Station

Moving level of the mold holder

Maximum stroke of pneumatic cylinders: 750 mm

Closing force of pneumatic cylinders: 687.5 daN × 4

Clamping Ring

Maximum stroke of pneumatic cylinders: 200 mm

Closing force of pneumatic cylinders at 6 bar: 735 daN × 2

Pre-Stretching / Cooling Dome for Thermoformed Product

Maximum stroke of pneumatic cylinders: 200 mm

Closing force of pneumatic cylinders: 687.5 daN × 2

Electric fan power: 0.55 kW × 4

Vacuum System

Pump capacity: 240 m³/h × 2

Pump motor power: 5.5 kW × 2

Tank capacity: 1200 L × 2

Pneumatic System

Operating pressure: 6 bar (±10%)

Air intake connection:

Water System

Operating pressure: 2.5 bar (±10%)

Water intake (flow to chiller, closed-loop connection): DN ½"

Temperature: 15°C (±10%)

Electrical System

Three-phase electrical voltage + neutral + earth: 400 V (+10% / -6%)

Frequency: 50 Hz

Installed power: 280 kW

Current: 465 A

Roll feed thermoforming machine currently used in the manufacture of refrigerator door liners.

Thermoformer comprises:

Roll Unwinding Station.

Heating Station - Upper and lower pre-heaters and heating elements.

Forming Station - Table closing force of daNx2: 735.

Clamping Ring.

Pre-Stretching / Cooling Dome.

Vacuum System.

Pneumatic System.

Full workshop manuals.

Machine footprint of approximately 10m x 3 m x 5m.

该广告为自动翻译，可能存在翻译错误。