金属板去毛刺机Q-Fin Quality Finishing Solutions
F1200 - VAC
金属板去毛刺机
Q-Fin Quality Finishing Solutions
F1200 - VAC
出厂年份
2025
状况
二手
位置
Bergeijk 

显示图片
显示地图
机器数据
价格和位置
- 位置:
- Wilgenakker 8, 5571 SJ Bergeijk, Nederland

拨打
技术细节
- 板材厚度(最大):
- 150 毫米
- 总长度:
- 2,150 毫米
- 总宽度:
- 2,205 毫米
- 总高度:
- 2,320 毫米
- 输入电压:
- 400 V
- 输入频率:
- 50 赫兹
- 功率:
- 16 千瓦 (21.75 马力)
- 输入电流:
- 32 A
优惠详情
- 广告编号:
- A21491092
- 参考编号:
- FTR-12-1313
- 更新:
- 最近更新时间为 12.03.2026
描述
This F1200 has only been used as a showroom model and is therefore almost new. The machine can be viewed at our showroom in Bergeijk.
Discover the advanced F1200 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This screen allows operators to easily switch between various finishing programs, ensuring high reproducibility of product quality and minimizing operator errors. Depending on the material to be processed, you can opt for a vacuum or magnetic support system.
At the infeed side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by four oscillating comb brushes that apply light pressure. The brushes provide uniform rounding of all edges and holes, both on the periphery and on the flat-ground product, resulting in the most optimal finish.
Additionally, the F1200 is also available in an XL version, which adds a fourth station. This station includes a second grinding unit that allows you to apply a line finish using a finer abrasive belt or finish with a scotch-brite belt.
The F1200 offers options for automatic brush calibration, ensuring consistent accuracy, as well as full ERP control and flawless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future!
Fpjdpfx Afeyt Npyewed
该广告为自动翻译,可能存在翻译错误。
Discover the advanced F1200 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This screen allows operators to easily switch between various finishing programs, ensuring high reproducibility of product quality and minimizing operator errors. Depending on the material to be processed, you can opt for a vacuum or magnetic support system.
At the infeed side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by four oscillating comb brushes that apply light pressure. The brushes provide uniform rounding of all edges and holes, both on the periphery and on the flat-ground product, resulting in the most optimal finish.
Additionally, the F1200 is also available in an XL version, which adds a fourth station. This station includes a second grinding unit that allows you to apply a line finish using a finer abrasive belt or finish with a scotch-brite belt.
The F1200 offers options for automatic brush calibration, ensuring consistent accuracy, as well as full ERP control and flawless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future!
Fpjdpfx Afeyt Npyewed
该广告为自动翻译,可能存在翻译错误。
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2018
8 在线广告
发送询价
电话 & 传真
+31 497 5... 广告
您的广告已成功删除
发生错误




