立式加工中心

PRIMINER VF-Mill ECO 1000

Standard Equipment:

• Siemens 828 D, PPU241 CNC control incl. 10.4" LCD monitor
• Electronic handwheel (MPG)
• Rexroth linear guides on all 3 axes
• C3 class ball screws from PMI or HWIN
• Telescopic covers on all axes
• Fully enclosed machine enclosure
• Heat exchanger for control cabinet
• Rigid tapping (without floating chuck)
• USB, CF card, Ethernet
• Double-arm tool changer with 24 stations
• Main spindle with belt drive, max. 10,000 rpm
• Spindle interface selectable with BT 40
• Automatic lubrication system
• Coolant system
• Chip rinsing device
• LED work lamp
• Program end indicator
• Toolbox
• Leveling screws and bolts
• Air blow gun
• Safety door interlock
• Operating manuals

Technical Specifications:

Main spindle servo motor: 9/22 kW
Spindle speed: 10,000 rpm, belt drive
Spindle taper: BT 40
Spindle diameter: 120 mm
Hnodpfjw Uih Ejx Af Aou
Table dimensions: 1100×500 mm
Max. table load: 700 kg
T-slots: 18 x 5 x 100 mm
Distance spindle / table surface: 100 ~ 650 mm
Distance spindle center / Z-axis cover: 550 mm
X/Y/Z travels: 1020×520×550 mm
Rapid traverse X/Y/Z: 30 (opt. 48) m/min
Max. feed rate: 1-12,000 mm/min
Tool changer: 24 (16) stations
Max. tool length: 300 mm
Max. tool diameter: 80 mm (120 mm with adjacent station empty)
Max. tool weight: 8 kg
Positioning accuracy: +/- 0.005 mm/300 mm
Repeatability: +/- 0.005 mm
Power supply: 380V +/-10%, 3PH, 50 Hz
Dimensions (L x W x H): 2850 x 2175 x 2850 mm
(Height incl. cable drag chain at max. Z-axis height)
Weight: 5,500 kg

Optional accessories:
12,000 rpm main spindle
SK 40 (DIN 69871/72), optionally BT 40 or HSK A 63
High-performance spindle with hybrid bearings
Exceptionally smooth running for low noise emissions
Very temperature-stable due to additional oil cooling (optional)

ICS / coolant through spindle 20 bar

4th axis Ø 125 mm, pneumatic clamping
Axial and radial table bearing
Preloaded bearing, extremely load-resistant even during heavy cutting
IP 65 protection rating
High rotational speeds with simultaneous high precision
Generously dimensioned drive worm and through hole

Table diameter: Ø 125 mm
Table bore diameter: Ø 35H7 mm
Inner diameter of arbor sleeve: -
Through hole diameter: Ø 25 mm
Center height (vertical mounting): 110 mm
Table height (horizontal mounting): 152 mm
Table T-slot width: 12H7 mm
Locating key width: 14h7 mm
Min. resolution: 0.001 degree
Positioning accuracy: 40 seconds
Repeatability: 4 seconds
Clamping system (pneumatic): 5 kg/cm²
Clamping force: 13 kg-m
Servo motor model:
Fanuc: α2i / β4is taper shaft
Mitsubishi: HF-75 / 105 taper shaft
Reduction ratio: 1 : 60
Max. rotation speed (Fanuc α): 83.3 minˉ¹
Max. permissible load:
Vertical position: 50 kg
with tailstock: 100 kg
Horizontal position: 100 kg
Net weight (without servo motor): 34 kg

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。