激光切割机PRIMA POWER
OPTIMO 3D
机器数据
- 机器名称:
- 激光切割机
- 制造商:
- PRIMA POWER
- 型号:
- OPTIMO 3D
- 机器编号:
- 1951 F 262
- 出厂年份:
- 2015
- 状况:
- 良好（使用过）
- 功能性:
- 完全功能
- 运行小时数:
- 10,740 h
技术细节
- 激光功率:
- 4,000 瓦特
- X轴行程:
- 4,500 毫米
- Y轴行程:
- 2,500 毫米
- Z轴移动距离:
- 1,020 毫米
- B轴回转角度（最小）:
- -135 °
- B轴回转角度（最大）:
- 135 °
提供
- 位置:
- Cataluña, 西班牙
– 距离：约 10,454 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- EXW
免费
描述
TECHNICAL DETAILS
Linear axis travel distances (XYZ): 4,500 x 2,500 x 1,020 mm
Rotary axis travel distances: A-axis ± 360º continuous, B-axis ± 135º
C-axis: ± 10 mm
Maximum speed of linear axes (XYZ): 50 m/min
Combined speed of linear axes: 85 m/min
Maximum speed of rotary axes A, B: 540 °/s
Acceleration of rotary axes A, B: 60 rad/s²
Laser type: CV4000 Laser
Installed power of laser source: 4,000 W
MACHINE DETAILS
Operating hours: 10,740 h
Power supply: 400 V, three-phase, 50 Hz
Installed power of cooling unit: 53 kW / 58 kVA
Extraction and dust treatment system power: 15 kW / 18 kVA
EQUIPMENT
- OPTIMO machine
- CNC control panel: P30L S/N 15/40 - 0083-01
- Prima Power cable remote control, serial number: 14/06 00489
- Hyfra Sigma 52-S cooling system
- Donaldson DFPRO12 extraction and dust treatment system
- Donaldson MD2 micro dosing system
The machine is powered, but air and gas are required. This supply is not available on site.
Dismantling and loading can be commissioned to a company for approximately €22,000.
该广告为自动翻译，可能存在翻译错误。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 广告编号:
- A20053340
- 参考编号:
- AUC-2509123
- 更新:
- 最近更新时间为 23.09.2025
- 独家优惠:
- 仅在拍卖中提供
参观
Ukmergė UMP TechnikaPD-10
联合王国 TrumpfTLC CUT 5
Strassberg BystronicByStar Fiber 3015 - 6 kW
Agios Athanasios SGPPEZZ 500/1700/1000
Balaguer BeyelerPR4
Veghel Wattsan6090 LT
Doxato/Drama WEINGARTEN
Friedrichsdorf StillRX 60-80 900
德国 BYSTRONICByStar 4020 15kW + ByTrans Extented
Su Zhou Shi EQ AutomationBD89NC2A1S
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我们检查什么？
检查
营业执照或商业登记摘录
检查经销商的
邮寄地址
银行账户信息验证
主电话号码的
电话
可接通性验证
企业信用报告
不得显示任何负面特征
买家的投诉
可能导致认证标志被撤销这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。