激光切割机Prima Power
CV 5000
机器数据
技术细节
- 激光类型:
- CO₂激光器
- 激光波长:
- 10 nm
提供
- 位置:
- Hessen, 德国
– 距离：约 9,470 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€2,000.00 (约束性)
免费
描述
No reserve price - guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Laser type: CO₂ laser
Average power: 200–5,000 W
Peak power: up to 6 kW
Wavelength: 10.6 µm
Beam quality factor M²:< 2.4 (typically 2.1–2.3)
Beam divergence: 1.5 mrad (half angle)
Beam diameter at output: 15 mm (1/e)
Beam diameter at output: 21 mm (full beam)
Pulse repetition rate: 0–2 kHz
Pulse width: 250 µs
Pulse resolution: 70 µs (?)
Alignment stability: ± 150 µrad (?)
Wavelength: 635 nm
Output power:< 1 mW
MACHINE DETAILS
Ambient temperature: 10–40 °C
Relative humidity:< 95% (non-condensing)
Connected load: 37 kW
Voltage: 400–460 V AC
Voltage tolerance: ± 10%
Power supply: 3-phase
Required cooling capacity: 45 kW
Flow rate: 133 l/min
Inlet temperature: 18–20 °C
Maximum inlet pressure: 6 bar
Nominal inlet pressure: 3 bar
Differential pressure: 1.5 bar
Coolant: Distilled water with 35% Dowfrost HD
Filter rating: 100 µm
Helium purity: 99.996%
Helium concentration: 67.7%
Helium consumption: 13.4–46.8 SLPH
Carbon monoxide purity: 99.995%
Carbon monoxide concentration: 4.1%
Carbon monoxide consumption: 0.9–3.0 SLPH
Nitrogen purity: 99.996%
Nitrogen concentration: 28.2%
Nitrogen consumption: 5.8–20.2 SLPH
Total gas consumption: 20–70 SLPH
Maximum content of water vapor, hydrocarbons, and oxygen:< 10 ppm
Compressed air: dry
Compressed air dew point:< 2 °C
Operating hours (according to meter): 27,875 h
该广告为自动翻译，可能存在翻译错误。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 广告编号:
- A22382937
- 参考编号:
- AUC-2607179
- 更新:
- 最近更新时间为 21.07.2026
- 独家优惠:
- 仅在拍卖中提供
参观
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我们检查什么？
检查
营业执照或商业登记摘录
检查经销商的
邮寄地址
银行账户信息验证
主电话号码的
电话
可接通性验证
企业信用报告
不得显示任何负面特征
买家的投诉
可能导致认证标志被撤销这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。