瑞士式车床PFIFFNER-MANURHIN
KMX XL 32
技术细节
- 车削长度:
- 330 毫米
- 车削直径:
- 33 毫米
- 最大转速:
- 8,000 转/分
- 送料长度 X 轴:
- 70 毫米
- Y轴进给长度:
- 225 毫米
- Z轴进给行程:
- 140 毫米
提供
- 位置:
- Hessen, 德国
– 距离：约 9,435 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€2,000.00 (约束性)
免费
描述
Equipment and Axis Systems
Turrets: 3 units with driven tools
Gantry: 1 unit with driven tools
C-axes: Main and sub-spindle with C-axis
TECHNICAL DETAILS
Turning diameter: 33 mm
Turning length: 330 mm
Number of axes: 17
Control: SIEMENS 840D
Main spindle
Work area – Max. bar capacity: Ø 32 mm
Spindle stock travel: 350 mm
Spindle bore: Ø 37.5 mm
Spindle drive – Power AC motor (100/40%): 8 / 12.5 kW
Max. spindle speed: 8,000 rpm
Spindle movement: left and right
Spindle feed
Max. feed rate: 18 m/min
Torque: 10.5 Nm
Max. speed: 3,000 rpm
Max. thrust: 3,000 daN
Turret heads (3 units)
Rotary drive: Gear motor
Torque: 25 Nm
Hydraulic locking – Force: 2,500 daN
Number of stations: 8
Tool clamping: VDI 30
Number of rotating tools: 4
Tool speed: 7,500 rpm
Drive
Motor power (100/40%): 5.5 / 7.5 kW
Rotation direction: left and right
C-axis: included
Feed
Feed speed: 30 m/min
Rated torque: 10.5 Nm
max. speed: 1,500 rpm
max. thrust: 3,000 daN
Turret slide X1 – U1
Number of cross slides: 1
Cross slide travel: 70 mm
max. feed speed: 18 m/min
Rated motor torque: 6 Nm
max. motor speed: 3,000 rpm
max. thrust: 500 daN
Rear tool slides
Number of slides: 2
Slide U1 travel: 70 mm
Slide Y1 travel: 225 mm
max. feed speed: 18 m/min
Number of stations: 6
Tool cross-section: 20 x 20
max. thrust: 500 daN
Rated torque: 6 Nm
Number of rotating tool holders: 1 / 4
Motor drive: 8,000 rpm
Motor torque: 4.2 Nm
max. speed single spindle ER32: 2,000 rpm – 12.6 Nm
1 modular double spindle ER20: 6,000 rpm – 4.2 Nm
1 modular double spindle ER20: 8,000 rpm – 3.2 Nm
Cross slide
Number of slides: 2
Cross slide X2 travel: 140 mm
Feed slide Z2 travel: 120 mm
max. feed speed: 18 m/min
max. thrust on X2: 500 daN
Rated torque: 6 Nm
max. thrust on Z2: 900 daN
Rated torque: 10.5 Nm
Turret slide X3
Number of slides: 1
Travel: 80 mm
max. feed speed: 18 m/min
Rated motor torque: 6 Nm
max. motor speed: 3,000 rpm
max. thrust: 500 daN
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A19229551
- 參考編號:
- AUC-2505104
- 最後更新:
- 於 27.05.2025
- 独家优惠:
- 仅在拍卖中提供
参观
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。