车床

Optimum TX5216V Vario

Optimum Optiturn TX 5216V – used machine.

- Machine bed made from heavily ribbed cast iron
- One-piece steel machine base
- High rigidity of the spindle head housing due to heavily ribbed 25GG cast iron
- Precisely machined saddle
- Shafts mounted on needle bearings, all components lubricated in oil bath
- Bed guideways hardened and precision-ground
- All electronic controls centrally accessible
- All feed gearbox gears made from hardened steel
- Handwheels decoupled and tested according to EN 23125
- Dual-channel safety electronics
- Switches with lifecycle calculation, tested according to EN ISO 13849
- Complete lead screw and feed shaft guard
- Full work area illumination
- Service-friendly removable rear panel
- Hardened and ground faceplate spindle ensures extreme accuracy and durability
- Due to the machine’s high cutting capacity, substantial material removal during rough machining is no problem
- Energy chain ensures gentle routing of cables and hoses
- Lockable chip guard moves with the saddle, featuring integrated position display and coolant hose, manually adjustable
- No change gears required
- Equipped with safety device to prevent simultaneous operation of thread cutting and feed mechanisms
- Electronic feed shut-off for the Z-axis
- Coolant system with separate coolant tank, fill level indicator and oil separator; easy, complete draining and cleaning per DIN
- Electrical position shut-off with quadruple position stop
- 3-jaw chuck included as standard
- Quick-change tool post SWH 7-C
- Tool holder 32 x 130 type D for 25 mm square tools
- Large spindle bore

Dimensions and Weights
- Length approx. 2925 mm
- Width/depth approx. 1195 mm
- Height approx. 1930 mm
Gkodox Hdq Topfx Afpef
- Weight approx. 2470 kg

Working Ranges
- Centre height 260 mm
- Centre distance 1600 mm
- Swing over bed 520 mm
- Swing over cross slide 324 mm
- Bed width 350 mm

Speed Range
- Number of speed ranges: 2 x 3 steps
- Spindle speed range: 12 – 1800 rpm

Electrical Data
- Output power (motor): 7.5 kW
- Total connected load: 5.5 kW
- Rated voltage: 400 V
- Mains frequency: 50 Hz

Coolant System
- Coolant pump output: 60 W
- Data type: Usage data

Tailstock
- Mount: MK 5
- Quill stroke: 180 mm
- Quill diameter: 72 mm

Spindle
- Spindle mount: Camlock DIN ISO 702-2 No. 8
- Spindle bore/bar pass diameter: 80 mm
- Tool post: SWH 7C
- Spindle taper: MK 7

Threading
- Metric thread pitch: 0.5 – 15 mm/rev
- Number of metric pitches: 55
- Inch thread pitch: 60 – 2 tpi
- Number of inch threads: 55
- Diametral pitch: 120 – 4 DP
- Number of diametral pitches: 55
- Module thread pitch: 0.25 – 7.5 mm x π
- Number of module pitches: 55

Traverse Paths
- Top slide travel: 170 mm
- Cross slide travel: 340 mm
- Carriage travel: 1400 mm

Feed
- Longitudinal feed range: 0.05 – 1.5 mm/rev
- Number of longitudinal feeds: 55
- Cross feed range: 0.025 – 0.75 mm/rev
- Number of cross feeds: 55

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。