铣床Optimum
F80 CNC
铣床
Optimum
F80 CNC
VB 不含增值税
€37,990
出厂年份
2025
状况
展品机
位置
Hallstadt 

价格和位置
VB 不含增值税
€37,990
- 位置:
- Dr.-Robert-Pfleger-Straße 26, 96103 Hallstadt, Deutschland

拨打
优惠详情
- 广告编号:
- A21307472
- 更新:
- 最近更新时间为 24.02.2026
描述
The machine is on display. Optimill F 80 CNC milling machine, direct from the manufacturer.
F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control is distinguished by performance, speed, precision, and long service life.
• Machine base constructed from cast iron for high rigidity
• Carousel-type tool changer with 12 tool stations
• All linear guides equipped with stainless steel covers
• Automatic central lubrication
• Siemens main spindle motor
• Siemens servo drive in all axes (closed loop)
• Maximum spindle speed of 10,000 rpm
• The portable electronic handwheel featuring an enabling switch and emergency stop button makes program setup significantly easier
• Coolant system with 70-liter coolant tank
• Tool change performed automatically or at the push of a button (electropneumatic tool clamping system)
• Heavy-duty, high-precision milling table – large dimensions and precision ground finish
• Generously dimensioned access doors minimize cleaning and maintenance time
• LED machine light for complete illumination of the working area
SINUMERIK 808 ADVANCED
Compact and robust
Communication features:
• Front USB port (IP65)
• Serial RS232C interface
• RJ45 Ethernet on rear panel
User-friendly:
• Technology-specific keyboard layout
• Hard keys with protective membrane
Process reliability:
• LED tool number display
• MCP with rotary switch for feed and spindle override
Complete package:
• RJ45 Ethernet port
• Prepared for remote maintenance
• AST function; allows simple optimization for enhanced dynamic and accuracy requirements
• Absolute encoder / no reference run necessary
• Higher precision
Dimensions and Weight
Length: approx. 1995 mm
Width/Depth: approx. 1930 mm
Height: approx. 1640 mm
Weight: approx. 2300 kg
Rapid traverse speed
X axis: 20 m/min
Y axis: 20 m/min
Z axis: 20 m/min
Electrical Data
Connection voltage: 400 V
Mains frequency: 50 Hz
Electrical Connection
Total connected load: 12 kVA
Horizontal Milling Table
Length: 800 mm
Width: 260 mm
Distance vertical spindle – table, min.: 100 mm
Distance vertical spindle – table, max.: 550 mm
T-slot size: 16 mm
Number of T-slots: 5
T-slot spacing: 50 mm
Maximum load capacity: 200 kg
Accuracy
Repeatability: ± 0.01 mm
Positioning accuracy: ± 0.01 mm
Coolant/Lubricant System
Coolant pump drive power: 450 W
Tank capacity: 80 l
Pneumatic Connection
Operating pressure: 7 bar
Travel
X axis (automatic): 450 mm
Y axis (automatic): 260 mm
Z axis (automatic): 450 mm
Max. spindle–column distance: 370 mm
Vertical Spindle
Spindle taper: BT 40
Speed range: 50 – 10,000 rpm
Note: Maximum spindle speed must be reduced by approx. 20% during continuous operation
Drive motor power S1 (continuous duty): 3.7 kW
Drive motor power S6-30% duty cycle: 5.5 kW
Drive motor torque S1: 24 Nm
Drive motor torque S6-30%: 36 Nm
Feed Motor Torque
X axis S1: 6 Nm
Y axis S1: 6 Nm
Z axis S1: 11 Nm
Tool Changer
Design: Carousel
Number of tool stations: 12 tools
Max. tool diameter: 95 mm
Max. tool length: 300 mm
Max. tool weight: 8 kg
Knjdpfeymkcujx Acajd
Chip-to-chip tool change time: 7 s
该广告为自动翻译,可能存在翻译错误。
F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control is distinguished by performance, speed, precision, and long service life.
• Machine base constructed from cast iron for high rigidity
• Carousel-type tool changer with 12 tool stations
• All linear guides equipped with stainless steel covers
• Automatic central lubrication
• Siemens main spindle motor
• Siemens servo drive in all axes (closed loop)
• Maximum spindle speed of 10,000 rpm
• The portable electronic handwheel featuring an enabling switch and emergency stop button makes program setup significantly easier
• Coolant system with 70-liter coolant tank
• Tool change performed automatically or at the push of a button (electropneumatic tool clamping system)
• Heavy-duty, high-precision milling table – large dimensions and precision ground finish
• Generously dimensioned access doors minimize cleaning and maintenance time
• LED machine light for complete illumination of the working area
SINUMERIK 808 ADVANCED
Compact and robust
Communication features:
• Front USB port (IP65)
• Serial RS232C interface
• RJ45 Ethernet on rear panel
User-friendly:
• Technology-specific keyboard layout
• Hard keys with protective membrane
Process reliability:
• LED tool number display
• MCP with rotary switch for feed and spindle override
Complete package:
• RJ45 Ethernet port
• Prepared for remote maintenance
• AST function; allows simple optimization for enhanced dynamic and accuracy requirements
• Absolute encoder / no reference run necessary
• Higher precision
Dimensions and Weight
Length: approx. 1995 mm
Width/Depth: approx. 1930 mm
Height: approx. 1640 mm
Weight: approx. 2300 kg
Rapid traverse speed
X axis: 20 m/min
Y axis: 20 m/min
Z axis: 20 m/min
Electrical Data
Connection voltage: 400 V
Mains frequency: 50 Hz
Electrical Connection
Total connected load: 12 kVA
Horizontal Milling Table
Length: 800 mm
Width: 260 mm
Distance vertical spindle – table, min.: 100 mm
Distance vertical spindle – table, max.: 550 mm
T-slot size: 16 mm
Number of T-slots: 5
T-slot spacing: 50 mm
Maximum load capacity: 200 kg
Accuracy
Repeatability: ± 0.01 mm
Positioning accuracy: ± 0.01 mm
Coolant/Lubricant System
Coolant pump drive power: 450 W
Tank capacity: 80 l
Pneumatic Connection
Operating pressure: 7 bar
Travel
X axis (automatic): 450 mm
Y axis (automatic): 260 mm
Z axis (automatic): 450 mm
Max. spindle–column distance: 370 mm
Vertical Spindle
Spindle taper: BT 40
Speed range: 50 – 10,000 rpm
Note: Maximum spindle speed must be reduced by approx. 20% during continuous operation
Drive motor power S1 (continuous duty): 3.7 kW
Drive motor power S6-30% duty cycle: 5.5 kW
Drive motor torque S1: 24 Nm
Drive motor torque S6-30%: 36 Nm
Feed Motor Torque
X axis S1: 6 Nm
Y axis S1: 6 Nm
Z axis S1: 11 Nm
Tool Changer
Design: Carousel
Number of tool stations: 12 tools
Max. tool diameter: 95 mm
Max. tool length: 300 mm
Max. tool weight: 8 kg
Knjdpfeymkcujx Acajd
Chip-to-chip tool change time: 7 s
该广告为自动翻译,可能存在翻译错误。
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
Ubstadt-Weiher
9,528 km
钻铣床
FehlmannPicomax 56TOP Heidenhain TNC 620
FehlmannPicomax 56TOP Heidenhain TNC 620
成功
您的消息已发送。
小广告
Matelica (MC)
9,572 km
加工中心 - 5 轴
DECKEL MAHODMU50T
DECKEL MAHODMU50T
成功
您的消息已发送。
小广告
意大利
9,568 km
DECKEL MAHO DMU 50 T
DECKEL MAHODMU 50 T
DECKEL MAHODMU 50 T
成功
您的消息已发送。
小广告
Ubstadt-Weiher
9,528 km
立式加工中心
FehlmannModell Picomax 60M HSC
FehlmannModell Picomax 60M HSC
成功
您的消息已发送。
小广告
Częstochowa
8,778 km
铣床
OPTIMUMF 150
OPTIMUMF 150
成功
您的消息已发送。
小广告
Reiden
9,684 km
铣床
EmcomatFB-450 L
EmcomatFB-450 L
成功
您的消息已发送。
小广告
Zagreb
9,225 km
铣床
iselICV4030EC
iselICV4030EC
成功
您的消息已发送。
小广告
Jonschwil
9,603 km
铣床
KUNZMANNWF 4/3
KUNZMANNWF 4/3
成功
您的消息已发送。
小广告
Sokołów Podlaski
8,515 km
数控加工中心 500 × 320 毫米
Metal Technics PolskaMTP CNC 532
Metal Technics PolskaMTP CNC 532
成功
您的消息已发送。
小广告
Hallstadt
9,348 km
铣床
OptimumF3 Pro
OptimumF3 Pro
您的广告已成功删除
发生错误




























































































