立式加工中心

Okuma keine DMG Mori VR40

CNC Milling Machine Okuma VR40
Year of manufacture: approx. 1992
3 axes, X = 560 mm, Y = 450 mm, Z = 450 mm travel.
Spindle speed: 8,000 rpm, SK40
Spindle hours: approx. 10,000 h
Coolant pump with approx. 5 bar coolant pressure
Coolant with six nozzles around the spindle
Tool magazine with 18 stations
Various tool holders with assorted tools
The machine originally operated in a sheltered workshop and has also only been used occasionally by us.
Dodpeyha R Rsfx Amwjcg
It is in very good condition, and both the axes and the spindle run quietly and smoothly.
Accuracy is very good.
The machine is available for inspection and demonstration under power at our facility.
It is sold with three machine vises and all accessories shown in the photos.
Complete documentation is available.
Two tool stations are defective as the plastic grippers are broken. They can be replaced with new grippers.
Normally, the machine has 20 tool stations. This has never been an issue for us over the years.

该广告为自动翻译，可能存在翻译错误。