数控车铣中心Nakamura
Tome Super NTJ
机器数据
技术细节
- 车削长度:
- 620 毫米
- 车削直径:
- 190 毫米
- 主轴速度（最大）:
- 5,000 转/分
- X轴行程:
- 345 毫米
- 主轴间距:
- 970 毫米
提供
- 位置:
- Provinz Overijssel, 荷兰
– 距离：约 9,490 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€500.00 (约束性)
免费
描述
TECHNICAL DETAILS
Max. turning diameter: 190 mm
Max. turning length: 620 mm
Max. swing diameter over bed: 190 mm
Swing diameter over cross slide: 190 mm
Standard turning diameter: 170 mm
Max. distance between spindles: 970 mm
Axis travel
X-axis 1: 345 mm
X-axis 2: 167.5 mm
Y-axis: +/- 45 mm
Z-axis 1: 1,240 mm
Z-axis 2: 685 mm
B-axis: +/- 91°
C-axis 1+2: 360°
Main spindle
Max. spindle speed: 4,500 rpm
Main spindle power rating: 18.5 / 15 kW
Spindle bearing diameter: 110 mm
Spindle bore: 80 mm
Max. bar capacity: 65 mm
Spindle mount: A2-6
Max. chuck diameter: 165 mm
C-axis: 0.001°
Sub spindle
Max. spindle speed: 5,000 rpm
Sub spindle power rating: 11 / 7.5 kW
Spindle bearing diameter: 90 mm
Spindle bore: 63 mm
Max. bar capacity: 51 mm
Spindle mount: A2-5
Max. chuck diameter: 165 mm
C-axis: 0.001°
Sub spindle travel: 760 mm
Upper turret
Number of tool stations: 24
Number of driven tool stations: 12
Shank diameter: 25 mm
Boring bar diameter: 32 mm
Indexing time: 0.2 - 0.7 s
Chip-to-chip time: 3.0 s
Max. tool diameter: 80 mm
B-axis: 182°
Y-axis: 90 mm
Lower turret
Number of tool stations: 24
Number of driven tool stations: 12
Shank diameter: 25 mm
Boring bar diameter: 32 mm
Indexing time: 0.2 - 0.7 s
Chip-to-chip time: 3.0 s
Max. tool diameter: 80 mm
Turret tool drive
Spindle speed at driven tool stations: 6,000 rpm
Power rating - driven tool stations: 5.5 / 3.7 kW
Number of driven tool stations: 24
Shank diameter - max. for pins: 25 mm / 32 mm
Feed rates
Rapid traverse (X / Y / Z): 16 / 6 / 40 m/min
Rapid traverse B-axis: 180°/s
Rapid traverse C-axis: 600 rpm
Feed rate X: max. 16,000 mm/min
Feed rate Y: max. 6,000 mm/min
Feed rate Z: max. 40,000 mm/min
Tip feed: 0 - 1,260 mm/min
Feed rate C: 1 - 4,800°/min
MACHINE DETAILS
Control: Fanuc 18 iTB
Weight: 12,500 kg
Electrical data
Frequency: 50 Hz
Voltage: AC 200/220 V
Maximum current: 198/180 A
Main switch: 225 A
Transformer capacity: 68.6 kVA
Control voltage:
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A20099145
- 參考編號:
- AUC-2509147
- 最後更新:
- 於 30.09.2025
- 独家优惠:
- 仅在拍卖中提供
参观
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。