断头台剪MVD
断头台剪
MVD
製造年份
2024
狀況
展品机
位置
Feulen 

顯示圖片
显示地图
价格和位置
- 位置:
- route d'Arlon 6, 9180 Oberfeulen, LU

撥打
技术细节
- 桌高:
- 865 毫米
- 后挡规行程距离 Z轴:
- 1,000 毫米
- 总重量:
- 6,000 千克
- 总长度:
- 4,630 毫米
- 总宽度:
- 2,965 毫米
- 总高度:
- 1,990 毫米
- 切割长度(最大):
- 3,100 毫米
- 定位精度:
- 0.1 毫米
- 工作台宽度:
- 500 毫米
优惠详情
- 產品ID:
- A19002526
- 最後更新:
- 於 11.06.2025
描述
For sale is an MVD B06-3100 hydraulic swing beam shear.
Technical Specifications:
- Cutting capacity (450 N/mm²): 6 mm
- Cutting capacity (700 N/mm²): 4 mm
- Cutting length (A): 3100 mm
- Cutting angle: 1.5°
- Number of clamps: 14
Nedpfjwd Sf Tsx Ahzelh
- Stroke rate / high-speed: 15/18 min
- Throughput (B): 3330 mm
- Table height (C): 865 mm
- Table width (D): 500 mm
- Throat depth (E): 250 mm
- Backgauge travel: 1000 mm
- Overall length (F): 4630 mm
- Overall height (H): 1990 mm
- Overall width (G): 2965 mm
- Oil tank capacity: 160 L
- Motor power: 10 kW
- Weight: 6 tons
Standard Features:
1. ELGO P40T Touch NC control
2. Rexroth/Hoerbiger hydraulic system
3. Manual cutting gap adjustment
4. 1,000 mm NC-controlled, programmable backgauge with motor control
5. Adjustable speed (single and double)
6. 250 mm throat depth
7. Programmable backgauge retraction movement
8. Foldable for parts longer than 1,000 mm
9. Cutting length adjustment allows for shorter strokes and thus an increase in the number of strokes
10. Ball transfer units in the table
11. Upper knife with 2 cutting blades, lower knife with 4 cutting blades
12. Special joint system to reduce maintenance
13. Front support arms with scale, stop, and 1,000 mm T-slots
14. Rear and side protective grilles
15. Cutting line lighting
16. Hinged finger guard (1,000 mm)
17. Foot pedal
18. Movable swivel arm and control cabinets
19. Emergency stop button
Optional equipment:
1. Pneumatic sheet support device (Type 1)
2. Automatic cutting gap adjustment with CNC
3. Angle stop 0-180º
4. Laser cutting line illumination
5. Blade for stainless steel processing
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
Technical Specifications:
- Cutting capacity (450 N/mm²): 6 mm
- Cutting capacity (700 N/mm²): 4 mm
- Cutting length (A): 3100 mm
- Cutting angle: 1.5°
- Number of clamps: 14
Nedpfjwd Sf Tsx Ahzelh
- Stroke rate / high-speed: 15/18 min
- Throughput (B): 3330 mm
- Table height (C): 865 mm
- Table width (D): 500 mm
- Throat depth (E): 250 mm
- Backgauge travel: 1000 mm
- Overall length (F): 4630 mm
- Overall height (H): 1990 mm
- Overall width (G): 2965 mm
- Oil tank capacity: 160 L
- Motor power: 10 kW
- Weight: 6 tons
Standard Features:
1. ELGO P40T Touch NC control
2. Rexroth/Hoerbiger hydraulic system
3. Manual cutting gap adjustment
4. 1,000 mm NC-controlled, programmable backgauge with motor control
5. Adjustable speed (single and double)
6. 250 mm throat depth
7. Programmable backgauge retraction movement
8. Foldable for parts longer than 1,000 mm
9. Cutting length adjustment allows for shorter strokes and thus an increase in the number of strokes
10. Ball transfer units in the table
11. Upper knife with 2 cutting blades, lower knife with 4 cutting blades
12. Special joint system to reduce maintenance
13. Front support arms with scale, stop, and 1,000 mm T-slots
14. Rear and side protective grilles
15. Cutting line lighting
16. Hinged finger guard (1,000 mm)
17. Foot pedal
18. Movable swivel arm and control cabinets
19. Emergency stop button
Optional equipment:
1. Pneumatic sheet support device (Type 1)
2. Automatic cutting gap adjustment with CNC
3. Angle stop 0-180º
4. Laser cutting line illumination
5. Blade for stainless steel processing
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
您的广告已成功删除
发生错误






