工业挂车 PA65-2 – 60 吨载重

Multi-Trans PA65-2

Operating conditions:
The heavy-duty trailer is designed for use on level, paved surfaces for internal plant transport.

Tandem operation:
The trailer components are not designed (without a coupling device) for tandem operation with multiple trailers.

Payload:
60 t at 6 km/h with evenly distributed load (surface load) across the load area between the axles. Point or line loads are only permitted upon prior notification.

Main frame:
Robust welded construction made from profile steel.

Loading area:
Dimensions approx. 10,000 x 3,000 mm, loading height approx. 1,105 mm, loading surface covered with softwood planks, all-round recessed edge protection.

Steering:
All-wheel steering on 4 oscillating axles; drawbar can be raised, removed, or repositioned from front to rear; coupling height at the towing vehicle approx. 650 mm (other coupling heights only permitted upon prior notification); towing eye according to DIN 74054, 40 mm diameter; track rods with adjustable ball joint heads; diagonal or tie rods adjustable and mounted with low-maintenance pivot bearings; drawbar drop protection according to accident prevention regulations (UVV).

Nwedoxrr Uhspfx Afcef
Chassis:
4 steered oscillating axles, 2 steered axle lines for even load distribution on all wheels; wheels with solid rubber elastic tires approx. 559 x 406 mm; wheel hubs with tapered roller bearings and permanent grease lubrication.

Paintwork:
Top coat RAL 5002 ultramarine blue

Rental or sale EU-wide.

该广告为自动翻译，可能存在翻译错误。