带 C 轴的 CNC 车削中心,12 个动力刀具位Monforts
RNC 500 AC
带 C 轴的 CNC 车削中心,12 个动力刀具位
Monforts
RNC 500 AC
出厂年份
2003
状况
二手
(完全功能)
位置
Vreden 

基本数据
价格和位置
- 位置:
- 48691 Vreden, Deutschland

拨打
优惠详情
- 广告编号:
- A23347211
- 参考编号:
- 1126-100001
- 更新:
- 最近更新时间为 17.11.2026
描述
CNC turning and milling center Monforts RNC 500 AC, year of manufacture 2003, with GE Fanuc 21i-TB, C-axis and 12-position turret from Sauter (VDI 50, all stations powered). The machine was in production until 2026 and was sold due to a restructuring of the manufacturing process. On November 17, 2026, we saw it running: reference run, spindle and turret operate perfectly.
Equipment:
- GE Fanuc Series 21i-TB control unit with Monforts control panel
- C-axis for drilling and milling operations
- Sauter tool turret, 12 stations, VDI 50, all powered
- Power chuck SMW-Autoblok KNCS-N 315 (Ø 315 mm, 3 jaws)
- Tailstock
- Hydraulic, self-centering steady rest
- Chip conveyor (hinged belt)
Hedpo Akuanjfx Aaionw
Included accessories as shown in the photos:
- Several powered tool holders Coromant Capto (up to 3,000 rpm, 150 Nm)
- Extensive set of VDI-50 tool holders (boring bar, drilling bar and collet chuck holders)
- Documentation including programming instructions, tool list
- Backup of CNC parameters
Condition and maintenance: Hydraulic hoses renewed approximately two years ago, buffer battery renewed, parameter backup available. Electrical connection 400 V / 50 Hz, 63 A, 41 kVA.
Inspection while running is possible by appointment at the Vreden location. If desired, we will take over transport, installation and commissioning.
Kraft Werkzeugmaschinen GmbH, member of the FDM. Call or write to us, and we will gladly send you videos of the test run.
该广告为自动翻译,可能存在翻译错误。
Equipment:
- GE Fanuc Series 21i-TB control unit with Monforts control panel
- C-axis for drilling and milling operations
- Sauter tool turret, 12 stations, VDI 50, all powered
- Power chuck SMW-Autoblok KNCS-N 315 (Ø 315 mm, 3 jaws)
- Tailstock
- Hydraulic, self-centering steady rest
- Chip conveyor (hinged belt)
Hedpo Akuanjfx Aaionw
Included accessories as shown in the photos:
- Several powered tool holders Coromant Capto (up to 3,000 rpm, 150 Nm)
- Extensive set of VDI-50 tool holders (boring bar, drilling bar and collet chuck holders)
- Documentation including programming instructions, tool list
- Backup of CNC parameters
Condition and maintenance: Hydraulic hoses renewed approximately two years ago, buffer battery renewed, parameter backup available. Electrical connection 400 V / 50 Hz, 63 A, 41 kVA.
Inspection while running is possible by appointment at the Vreden location. If desired, we will take over transport, installation and commissioning.
Kraft Werkzeugmaschinen GmbH, member of the FDM. Call or write to us, and we will gladly send you videos of the test run.
该广告为自动翻译,可能存在翻译错误。
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
德国
9,541 km
数控车铣中心
MONFORTSRNC 500 AC
MONFORTSRNC 500 AC
成功
您的消息已发送。
小广告
Kreuztal
9,461 km
周期控制车床
MONFORTSRNC500 AC 1500 x 300 mm
MONFORTSRNC500 AC 1500 x 300 mm
您的广告已成功删除
发生错误















































