火焰切割机MicroStep
MG 12501.35 Prk MGc + 1.35 BkGG
火焰切割机
MicroStep
MG 12501.35 Prk MGc + 1.35 BkGG
出厂年份
2021
状况
二手
位置
Köln 

基本数据
价格和位置
- 卖方所在地:
- Wipperfürther Straße 29-31, 51103 Köln, 德国

拨打
优惠详情
- 广告编号:
- A23349671
- 参考编号:
- 0602-260048
- 更新:
- 最近更新时间为 17.11.2026
描述
MicroStep Gantry System MG 12501.35PrkMGc+1.35BkGG with two machine gantries
The MicroStep MG series is a CNC-controlled, highly precise oxy-fuel/plasma sheet metal cutting system with a drilling unit and a pin marking unit in a dual-gantry design.
The gantry cutting system is designed for performance and load capacity. Sheet metal with dimensions of 12,000 mm in length, 3,000 mm in width, and 200 mm in thickness can be processed.
The high dynamics of the system result from a low-set machine gantry, digital AC servo motors, and linear guides with helical rack and pinion drives.
The integrated BEUTING belt conveyor table under the sheet metal support in the water basin ensures continuous slag removal.
Working area per gantry: approx. 12,000 × 3,000 mm
Positioning speed up to 40 m/min
Positioning accuracy ≤ 0.06 mm/m
Repeatability 0.05 mm/m
Servo drives with linear guides and rack and pinion drive
Machine gantry 1 equipment:
Plasma rotator for 3D bevel cuts and weld preparation
Kjellberg HiFocus 360i neo plasma source (10–360 A)
Automatic gas console
Fully automatic oxy-fuel torch with collision protection
Pin marking system "MicroPunch"
CCD camera for hole detection and contour adjustment [Description | PDF]
Machine gantry 2 equipment:
Hnodpe Akwqiefx Adgew
Fully automatic drilling spindle MG-40-P26
Drilling up to Ø 40 mm
Tapping up to M30
Tool magazine for 8 tools
Two fully automatic oxy-fuel torches with collision protection
Control and Software
The system features the MicroStep iMSNC® control system with:
24" touchscreen
User management
Expert system for automatic parameter generation
Management of cutting programs (MRP)
Machine and production reports
EcoInfo for cost and time calculation
Remote diagnostics and TeamViewer remote maintenance [Description | PDF]
Cutting table and extraction
BEUTING belt conveyor table GFT500 2IAK
Over the full 12.6 m cutting length
Automatic slag removal via conveyor belt
Segmented extraction
Water tank as a spark pre-separator [Description | PDF]
BEUTING cartridge filter system PFM5-10
9,300 m³/h extraction capacity
10 filter cartridges
Dust class M
Separation rate 99.99%
Special technologies of the MG series
PowerHole® for precise hole quality
Adaptive height control
ACTG® automatic calibration of the bevel cutting head
Smart Z movement for higher productivity
Automatic central lubrication
SMS fault message (infoMessage®)
System safety
Light curtains on both gantries
Emergency stop systems
Collision protection
Distance sensor between the two gantries
Tactile shutdown devices on the guide rails
该广告为自动翻译,可能存在翻译错误。
The MicroStep MG series is a CNC-controlled, highly precise oxy-fuel/plasma sheet metal cutting system with a drilling unit and a pin marking unit in a dual-gantry design.
The gantry cutting system is designed for performance and load capacity. Sheet metal with dimensions of 12,000 mm in length, 3,000 mm in width, and 200 mm in thickness can be processed.
The high dynamics of the system result from a low-set machine gantry, digital AC servo motors, and linear guides with helical rack and pinion drives.
The integrated BEUTING belt conveyor table under the sheet metal support in the water basin ensures continuous slag removal.
Working area per gantry: approx. 12,000 × 3,000 mm
Positioning speed up to 40 m/min
Positioning accuracy ≤ 0.06 mm/m
Repeatability 0.05 mm/m
Servo drives with linear guides and rack and pinion drive
Machine gantry 1 equipment:
Plasma rotator for 3D bevel cuts and weld preparation
Kjellberg HiFocus 360i neo plasma source (10–360 A)
Automatic gas console
Fully automatic oxy-fuel torch with collision protection
Pin marking system "MicroPunch"
CCD camera for hole detection and contour adjustment [Description | PDF]
Machine gantry 2 equipment:
Hnodpe Akwqiefx Adgew
Fully automatic drilling spindle MG-40-P26
Drilling up to Ø 40 mm
Tapping up to M30
Tool magazine for 8 tools
Two fully automatic oxy-fuel torches with collision protection
Control and Software
The system features the MicroStep iMSNC® control system with:
24" touchscreen
User management
Expert system for automatic parameter generation
Management of cutting programs (MRP)
Machine and production reports
EcoInfo for cost and time calculation
Remote diagnostics and TeamViewer remote maintenance [Description | PDF]
Cutting table and extraction
BEUTING belt conveyor table GFT500 2IAK
Over the full 12.6 m cutting length
Automatic slag removal via conveyor belt
Segmented extraction
Water tank as a spark pre-separator [Description | PDF]
BEUTING cartridge filter system PFM5-10
9,300 m³/h extraction capacity
10 filter cartridges
Dust class M
Separation rate 99.99%
Special technologies of the MG series
PowerHole® for precise hole quality
Adaptive height control
ACTG® automatic calibration of the bevel cutting head
Smart Z movement for higher productivity
Automatic central lubrication
SMS fault message (infoMessage®)
System safety
Light curtains on both gantries
Emergency stop systems
Collision protection
Distance sensor between the two gantries
Tactile shutdown devices on the guide rails
该广告为自动翻译,可能存在翻译错误。
发送询价
电话 & 传真
+49 221 9... 广告
您的广告已成功删除
发生错误































