平面磨床METALLKRAFT
FSM 1545
平面磨床
METALLKRAFT
FSM 1545
起拍價 不包含增值稅
€21,500
製造年份
2022
狀況
全新
位置
Chemnitz 

顯示圖片
显示地图
机器数据
价格和位置
起拍價 不包含增值稅
€21,500
- 位置:
- F.-O.-Schimmel-Str. 3, 09120 Chemnitz, DE
撥打
技术细节
- 磨削长度:
- 450 毫米
- 磨削宽度:
- 150 毫米
- X轴进给速度:
- 25 米/分钟
- 工作台与主轴中心的距离:
- 450 毫米
- 砂轮宽度:
- 13 毫米
- 主轴速度(最大):
- 2,900 转/分
- 主轴转速(最小):
- 2,900 转/分
- X轴行程:
- 500 毫米
- Z轴移动距离:
- 185 毫米
- 磨削主轴转速:
- 2,900 转/分
- 保修期限:
- 12 个月
- 功率:
- 1.5 千瓦 (2.04 马力)
- 输入电压:
- 400 V
优惠详情
- 產品ID:
- A19617576
- 參考編號:
- ST3931545
- 最後更新:
- 於 21.07.2025
描述
Precision Surface Grinding Machine Metallkraft FSM 1545
With NC-controlled vertical feed
- For precision surface grinding applications
- Maximum rigidity and stability thanks to stress-relieved, annealed, and hardened cast iron construction
- High-quality spindle with precision taper roller bearings (runout accuracy 2 µm)
- Electromagnetic clamping plate for securing the workpiece, including automatic demagnetization function
- Automatic central lubrication for all slideways and spindles
- Hand-scraped and Turcite-B-coated V-flat guides ensure exceptionally smooth, low-friction movement
- Dust-tight halogen work lamp, fully touch-protected, and protected against water jets to IP65
- Second grinding wheel flange included in delivery
Automatic Feed Control AD 5
Several grinding cycles are available: surface grinding with infeed at the starting point, slot grinding with infeed at the starting point, slot grinding with infeed at the start and end points. The infeed of the grinding wheel can be individually set depending on the workpiece. The total grinding allowance is divided into rough and fine increments; the feed steps can be freely set, with a minimum resolution of up to 0.001mm depending on the application. The option to program dead feeds after a certain number of infeed steps, as well as spark-out passes after the grinding measurement has been reached, ensures optimal grinding results.
Technical Data:
Dimensions and Weights
Length (product) approx. 1900mm Width/Depth (product) approx. 1300mm
Height (product) approx. 1700mm Net weight approx. 900kg
Electrical Data
Hydraulic pump motor power 0.75kW Drive motor power 1.5kW
Supply voltage 400V Mains frequency 50Hz
Spindle
Spindle speed 2900min¯¹
Grinding Wheel
Grinding wheel outer diameter 180mm Grinding wheel width 13mm
Grinding wheel bore 31.7mm
Surface Grinding Table
Clamping area length 450mm Clamping area width 150mm
Isdpfew Az Hkjx Af Asih
Workpiece weight max. 140kg Max. distance spindle to surface grinding table 450mm
X-axis
Feed speed 5–25m/min X-axis travel 500mm
Z-axis
Travel 185mm
The machine is a showroom model – new and comes with full warranty.
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
With NC-controlled vertical feed
- For precision surface grinding applications
- Maximum rigidity and stability thanks to stress-relieved, annealed, and hardened cast iron construction
- High-quality spindle with precision taper roller bearings (runout accuracy 2 µm)
- Electromagnetic clamping plate for securing the workpiece, including automatic demagnetization function
- Automatic central lubrication for all slideways and spindles
- Hand-scraped and Turcite-B-coated V-flat guides ensure exceptionally smooth, low-friction movement
- Dust-tight halogen work lamp, fully touch-protected, and protected against water jets to IP65
- Second grinding wheel flange included in delivery
Automatic Feed Control AD 5
Several grinding cycles are available: surface grinding with infeed at the starting point, slot grinding with infeed at the starting point, slot grinding with infeed at the start and end points. The infeed of the grinding wheel can be individually set depending on the workpiece. The total grinding allowance is divided into rough and fine increments; the feed steps can be freely set, with a minimum resolution of up to 0.001mm depending on the application. The option to program dead feeds after a certain number of infeed steps, as well as spark-out passes after the grinding measurement has been reached, ensures optimal grinding results.
Technical Data:
Dimensions and Weights
Length (product) approx. 1900mm Width/Depth (product) approx. 1300mm
Height (product) approx. 1700mm Net weight approx. 900kg
Electrical Data
Hydraulic pump motor power 0.75kW Drive motor power 1.5kW
Supply voltage 400V Mains frequency 50Hz
Spindle
Spindle speed 2900min¯¹
Grinding Wheel
Grinding wheel outer diameter 180mm Grinding wheel width 13mm
Grinding wheel bore 31.7mm
Surface Grinding Table
Clamping area length 450mm Clamping area width 150mm
Isdpfew Az Hkjx Af Asih
Workpiece weight max. 140kg Max. distance spindle to surface grinding table 450mm
X-axis
Feed speed 5–25m/min X-axis travel 500mm
Z-axis
Travel 185mm
The machine is a showroom model – new and comes with full warranty.
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
您的广告已成功删除
发生错误