伸缩臂装载机

Merlo TF 42.7 CS-145

Operating hours: 1,211, First registration: 11/10/2022

Basic Equipment / Technical Data
- Maximum lifting capacity: 4,200 kg
- Maximum lift height: 7,000 mm
- Maximum outreach: 3,800 mm
- Length to attachment carrier: 4,730 mm
- Width: 2,310 mm
- Height: 2,530 mm / 2,590 mm (when CS activated)
- Total weight with forks: 8,170 kg
- Total weight without forks: 8,000 kg

Engine:
- 4-cylinder Deutz TCD 3.6
- 3.6 l displacement
- Water-cooled
- Output: 105 kW (143 HP) at 2,300 rpm
- Hydraulic reversible cooling fan
- Emissions: Stage V
- Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR)

Drive:
- Hydrostatic drive pump: electronically controlled with variable output
- Engine: variable displacement motor
- EPD TOP incl. optional automatic speed increase
- Mineral hydraulic oil HVI 46

Transmission:
- 2 gears, electrohydraulic control
Pedpfotu Sztex Ah Aopl
- Max speed = 1st / 2nd gear: 16 / 20 km/h, optional 40 km/h

Cab:
- Enclosed cab
- Split door
- 360° all-round visibility
- GRAMMER V3611 air-suspended seat with lap belt
- ROPS/FOPS-certified
- Heater
- Front, roof, and rear wipers
- Sun blind
- 4x1 electronic joystick with capacitive release incl. travel direction switch
- CS = hydropneumatic cab suspension

Telescopic boom:
- 2-section, with electronic end position damping Soft Stop
- Attachment carrier quick-change system, type "ZM2", hydraulically controlled from cab

Steering:
- Hydraulic steering
- 3 steering modes: four-wheel, front-wheel, crab steering
- Permanent all-wheel drive

Axles:
- Front axle: rigid
- Rear axle: oscillating

Brakes:
- Power-assisted disc brakes on all four drive shafts, automatically applied parking brake when engine is stopped

Frame:
- High-strength steel construction

Hydraulics:
- Load Sensing pump with variable output
- Working hydraulics flow: 150 l/min
- Hydraulic fan flow: 46 l/min
- Total flow: 196 l/min
- Working pressure: 250 bar
- Flow sharing control block

Electrics:
- 12 V system
- 100 Ah battery
- 120 A alternator

Stabilisation control:
- Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signals, attachment recognition and overload cut-off

Tyres:
- 460/70 R 24 Michelin XMCL

Standard equipment:
- Power brakes
- Hydraulic oil cooler
- Rear plate for attaching a trailer hitch
- Hydraulic reversible fan
- Radio pre-wiring
- Work lights on cab (2 front, 2 rear)
- Pre-installed function for additional boom head attachment
- 2 hydraulic connections at boom head
- Load protection grid at attachment carrier
- Road lighting
- Automatic battery main switch
- Electrical connection cable in boom
- Audible reverse signal
- Lift cylinder support for safety

Optional equipment:
- EU road approval as tractor / agricultural tractor 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connection, for compact and medium models, height-adjustable version strongly recommended
- Air conditioning
- Boom Suspension System (BSS) for vibration damping
- LED beacon on cab roof (approval required)

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。