带锯机-水平

MEP SHARK 332-1 SXI EVO

cutting diameter 300 mm
capacity 90 degrees: flat 330 x 260 mm
capacity 90 degrees: square 260 x 260 mm
capacity 45 degrees: flat 270 x 200 mm
Dodpfxsfg E H Us Amzsck
capacity 45 degrees: round 260 mm
capacity 45 degrees: square 250 x 250 mm
capacity 60 degrees: flat 170 x 170 mm
capacity 60 degrees: square 170 x 170 mm
capacity 60 degrees: round 180 mm
turning speed range: 40 / 80 m/min
dimensions of saw-band 3320 x 27 x 0,9 mm
engine output 1,5 / 1,8 kW
weight 670 kg
Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with
semi-automatic-dynamic, manual function, has a MEP-28 control
for miter cuts from 45° right to 60° left.
Some features:
New centralized switch console on an articulated arm.
Low voltage control panel:
Polyester membrane keyboard with thermoformed highlighted
Push buttons and actuation control signal.
Display to show:
* Diagnostics (messages in the user language)
* Alarms (description of alarm causes)
* State of inputs and outputs
* Counting cuts
* Time taken for the cut made
* Current consumption of the saw blade motor
* Saw blade tension
* Blade speed
* Numerical display of head position.
Switch handle IP55 of manual 24V cycle.
Complete program of all special cutting cycles.
Identification of other possible special cutting cycles for special ones
Applications
New, latest generation hydraulic control unit, extremely powerful
and with low energy consumption.
Turntable (on roller bearings of 420 mm with preloaded thrust bearings
assembled).
Double belt speed (40/80 m/min.) with control
Intended to accommodate an electronic inverter for the
Continuous regulation of the belt speed from 20 to 90 m/min.
Stroke of the saw bow can be programmed directly from the control panel
Adaptation to the cutting material.
Clamping device can be moved laterally to the left and right
Quick release vice.
Manually operated strap tension control with display on the screen
electronic converter.
Base designed to completely contain the coolant,
even with maximum angle cuts.
The coolant pan (provided with an electric pump for lubrication and
Cooling of the saw band) and the chip drawer (can be replaced by a
Chip conveyor to be replaced - see special accessories) are in the base
frame
built-in.
Preparation for installing the minimum blade lubrication kit
(Optional, in addition to the conventional standard lubrication with
emulsion oil.
Chip clearing brush.
The machine is intended for pallet truck transport.
Adjustable length stop for cuts of the same length
Material support arm with roller for attaching the loading platform
Bimetal saw band for solid and profile material.
Tools and instructions for use in the respective user language.