数控车床

MAZAK QT 200MSx500

turning diameter 380 mm
turning length 511 mm
control Mazatrol SmoothG
turning diameter over slide 276 mm
max. swing diameter over bed 675 mm
Standard machining diameter 276 mm
bar material dia. 65 mm
x-axis 234 mm
rapid traverse X-axis 30 m/min
z-axis 625 mm
rapid traverse Z-axis 33 m/min
turning speeds 35 - 5000 U/min
spindle nose A2-6
spindle bore 76 mm
Motor output (40%ED) 26 KW
22 KW
Max. Torque 465 Nm
turning speeds 6000 U/min
Main drive power 11 KW
Max. Torque 90 Nm
Milling spindle speeds ( driven tools) 35-6000 1/min
torque on milling spindle max: 47 Nm
power capacity - milling spindle 5,5 (40% ED) kW
Milling spindle power 3,7 kW
Numbers of tools 12 (angetrieben)
Tool cross section (outside) 25 qmm
Boring bar- Ø 40 mm
Drill- Ø 20 mm
Dodpfstugggjx Aafewa
Mill- Ø 20 mm
Tap- Ø M20x2,5
Switching time one turret station ca. 0,20 sec
coolant tank 180 l
connected load 46,2 kW
weight of the machine ca. 5,9 t
dimensions of the machine ca. 2,7 x 1,9 x 1,9 m
incl. the following accessories:
- Signal light (3-colour LED), rectangular
- High-performance coolant system (1.1 kW)
Flow rate max. 17.6 l/min, pressure (at pump) 5 bar.
- Additional coolant nozzle main spindle
- Preparation for oil mist extraction electrical/mechanical flange 98mm
- Preparation for bar feed
- Robot interface (Advance/Profibus)
- Chip conveyor with low ejection height
- Overload monitoring system
- Drilling cycle with torque-dependent chip breaking
- Preliminary use of a hollow clamping cylinder on counter spindle
- Hollow clamping device incl. draw tube + cylinder
- Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52
- Chuck Hainbuch Spanntop Nova Axfix special mini size 52
- 2 x collets
- Changing device for collet chuck

STANDARD ACCESSORIES
Automatic on/off and warm-up function
Air blowing device on the chuck on the counter spindle
Use of linear systems with guide carriage
USB connection (1 connection)
Set of manuals in electronic form on CD
C-axis main spindle Input accuracy 0.0001°
Spindle positioning counter spindle without C-axis Input accuracy 0.001°
Tool turret with 12 stations VDI,
Operator door with locking switch
Double foot switch for both main and counter spindle
Hydraulic pressure interlock
Fully enclosed work area
Work area lighting
Safety precautions in accordance with global standards
High-performance coolant system (520W)
Flow rate max. 11.5 l/min.
Complete coolant system
Automatic opening/closing of the chuck jaws
Automatic tool eye
Absolute positioning system
Preparation for chip conveyor (lateral)
Synchronisation of main and counter spindle
Synchronised tapping with milling spindle
Relocation Detector
Mazatrol SmoothG control
19" LCD colour screen (touch screen)
User macro (600 variables)
EIA/ISO input function
Optional stop (optional stop)
Tool path check in the background
Thread cutting function (G33)
Polar coordinate input (EIA)
Drawing data direct input function
Interface for LAN
SD memory card I/F

- Second-hand machine without warranty
- All dimensions, weights and performance specifications are non-binding