Matsuura LV-500

Matsuura LV-500

This 3-axis Matsuura LV-500 was manufactured in 2017. It features a maximum spindle speed of 46,000 rpm and a robust table size of 540 x 350 mm with a maximum table load of 100 kg. The machine is equipped with a tool magazine capacity of 10 tools and rapid traverse rates of 90 m/min. If you are looking to get high-quality machining capabilities, consider the Matsuura LV-500 vertical machining center we have for sale. Contact us for further details.

• Control: L-Tech 30iB
• Table:
• Size: 540 × 350 mm
• T-slots: 18 mm (3 slots)
• Distance table to spindle nose: 150 – 450 mm
• Spindle:
• Taper: BT30 BIG-PLUS
• Motor: 7.5 / 15 kW
• Max torque: 8.86 Nm @ 15,000 rpm
• Direct drive
• Feed rates:
• Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min
• Cutting feed: 35,000 mm/min
• Minimum increment: 0.0001 mm
• ATC (Automatic Tool Changer):
• Tool taper: BT30
• Max tool diameter: 46 mm
• Max tool length: 150 mm
• Tool-to-tool time: 2.2 s
• Chip-to-chip time: 5.2 s
• Accuracy:
• Positioning accuracy: ±0.001 mm
• Repeatability: ±0.0005 mm
• Power requirements:
• Power supply: AC 200/220V ±10%
• Required power: 35 kVA
• Frequency: 50/60 Hz
• Air pressure: 0.54 – 0.93 MPa
• Air consumption: 430 NL/min
• Tank capacities:
• Coolant: 320 L
• Oil cooler: 9.5 L
• Oil: 1.8 L
• Hydraulic: 25 L
• Standard equipment:
Gbodpsy Uwv Eofx Ac Ijt
• Spindle oil cooler
• Coolant unit
• Chip flush
• Linear motor cooler
• Scale feedback
• Air dryer
• Synchronized tapping
• Work light
• Automatic grease lubrication
• MIMS system (Matsuura Intelligent Meister System)

Technical Specification
Taper Size BT 30