其他

MAN 18.290 Baumaschinentransporter7,30m NL 8,8to

As-new and very well-maintained 18 t MAN TGM 18.290 TG3 construction machine transporter with automatic transmission, air conditioning, rear axle air suspension, Möller transport system 7.3 m, fitted with hydraulic loading ramps for construction machine transport, direct from first owner, operated under a MAN maintenance contract, only 24,510 km.

Truck specification:

First registration: 07.03.2022
Mileage: approx. 24,540 km
213 kW / 290 HP

Short CC cab
Euro 6 D engine
Drive: 4 x 2
Wheelbase: 5,425 mm
MAN TipMatic 12.12. OD automatic gearbox
Gearbox function: MAN Idle Speed Driving
Driving program: MAN TipMatic Efficiency
Front axle leaf-sprung, rear axle air-suspended
Rear axle differential lock
Front axle load: 7,500 kg, rear axle: 11,500 kg
Technical rear axle capacity possible: 12,000 kg
Stabilizers: front and rear axles
Shock absorbers: front and rear axles
Axle ratio: i=4.11
Emergency brake assist
Disc brakes: front and rear axles
Emergency braking assistant EBA
Lane departure warning LDW
EBS with ABS and ASR
ESP
MAN EasyStart hill-hold function
Lane departure warning LDW
Air conditioning
Cruise control
Sun visor
Multifunction steering wheel
220 L fuel tank
2 LED beacon lights on cab roof
2 work lights on cab roof
LED daytime running lights
LED side marker lamps
2 LED contour lights
Electrically adjustable and heated exterior mirrors
Electric windows
Driver comfort seat, air-suspended, with lumbar support and shoulder adaptation
MAN 7" media system
German vehicle, first owner
Excellent and well-maintained condition
Vehicle operated under MAN maintenance contract
Regular service records available

Möller transport system specification:

Construction machine transport body approx. 7.30 m long x 2.48 m wide
Aluminum side boards approx. 0.40 m high, length approx. 5,600 mm up to slope
2 hydraulic rear loading ramps
Fully hot-dip galvanized, reinforced for load bearing
Tapered outer frame with continuous perforations for load securing, usable as lashing points, certified to DIN-EN 12640, up to 2,000 kg
Additional 8 x Thiele lashing eyes integrated into the outer frame
Aluminum forklift collision protection, bolted to side of frame
Floor made of grating for high point load resistance
Fixed bulkhead with steel frame and aluminum profiles, 800 mm high
Bulkhead fitted with holders for load securing equipment
8 mm phenolic coated board in front of bulkhead as wear protection
Stake system - Kinnegripp
Fixed front corner posts
2 removable and folding intermediate posts each side (right & left)
2 lockable stainless steel toolboxes, approx. 600 mm x 600 mm x 300 mm
2 LED work lights in bulkhead, protected, switchable from cab
2 support plates with straps in single holders
Second axle mudguards, half-shell plastic with mudflaps
Constant pump 40 L/min
Aluminum hydraulic tank 60-80 liters
1 pair of hydraulic foldable ramps mounted at vehicle rear
2-part approx. 2,300 mm + 600 mm length, approx. 1,250 mm wide, hydraulically foldable, grating type
Dsdpfx Aexharmoa Nscn
Ramp control via separate control block at protected position on vehicle rear right
2 pairs of additional foldable rear supports
Ball-type coupling + 12 V

Internal vehicle no.: 2575

Price NET plus 19% VAT. Attractive financing options available on request. All information without guarantee. Subject to errors and prior sale.

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。