激光零接头形状零边边缘

Mafell Kluge HIT M

Micro-stationary system for the production of a zero joint - jointless optics as if from a single casting
A machining table is also available as an option
Bodpsd St R Sjfx Aagjdb
- Heating time:ᐸ30Sekunden
- max. edge height 65mm (option 103mm), max. edge thickness 3mm
- Processing of so-called "laser edges" (co-extruded and post-coated edges, as well as old-classically pre-coated EVA hot-melt adhesive edges)
- higher heat resistance and water resistance
- perfectly straight, inclined, curved and round panel materials as well as moulded parts can be processed.
- sloping cut surfaces of up to 55° (installation in the available table)
- high process reliability & lower follow-up costs;
- no glue change necessary = almost no set-up costs;
- no burning of the glue;
- no glue residue on the workpiece
- Infinitely variable feed speed from 1 to 5.5 m/min.
- continuously adjustable hot air up to 520°C
- 230VoltAC, 4m connection cable, compressed air hose
- 3,05kW
- low air requirement, assembly compressor is sufficient
The zero joint unit can be used mobile as well as micro-stationary!
Optimal e.g. for larger moulded parts and for use on the construction site. For this purpose, a Systainer with an additional supply line for electricity and compressed air is included in the scope of delivery.

The system is also available for retrofitting in an edge banding machine (Hot air, Airtec) - please ask us

该广告为自动翻译，可能存在翻译错误。