Multigraf CP 375 MONO

Year: 2016

Condition: good

Counter: approx. 3,340,000

Configuration:

- Creasing tool
- Perforating tool, 11 TPI
Kdedjzuzd Rspfx Amner
- 2 × perforating heads, 11 TPI

Technical Specifications:

- Feeder: suction belts
- Feeder pile height: 180 mm
- Minimum sheet size: 105 × 148 mm
- Maximum sheet size: 375 × 660 mm; 375 × 1,050 mm with table extension
- Paper weight – perforating: 80–300 gsm or max. 0.3 mm
- Paper weight – creasing: 80–400 gsm or max. 0.4 mm
- Maximum speed: 5,000 A4 sheets/hour

Perforating

- Maximum number of operations: 20 per sheet
- Minimum spacing: 3 mm
- Number of tools: 1 perforating tool

Creasing

- Maximum number of operations: 20 per sheet
- Minimum spacing: 1 mm

Multigraf Touchline CP 375 MONO is designed for perforating and creasing sheets with paper weights of up to 400 gsm. The machine is equipped with perforating tools for crosswise and longitudinal perforation in a single pass.

Thanks to its interchangeable tools, the new Touchline CP 375 MONO can be quickly converted from a creasing machine to a perforating machine or vice versa at any time. The cross-perforating bar can be replaced with a creasing bar, allowing cross creasing, longitudinal perforation and partial longitudinal perforation in a single pass through the machine. Machine setup, including perforation, is fully automatic via the touchscreen. Sheet feeding is automatic and uses suction belts, and the machine can be equipped with double-sheet detection.