洁净室 ISO 8
洁净室 ISO 8
EXW VB 不含增值税
€50,000
出厂年份
2020
状况
二手
(完全功能)
位置
Łódź 

基本数据
价格和位置
EXW VB 不含增值税
€50,000
- 位置:
- Łódź, 波兰

拨打
优惠详情
- 广告编号:
- A14477200
- 更新:
- 最近更新时间为 02.01.2024
描述
CLEANROOM - ISO 8
| Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification.
In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa.
Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos.
Technical drawings attached to photos.
Description of ventilation
The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity.
Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C
c. Humidity max 38%.
a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6.
As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state.
Kdodeq H H Ruopfx Acasw
b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air.
c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk.
The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa
The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained.
Technical data attached to the photos.
该广告为自动翻译,可能存在翻译错误。
| Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification.
In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa.
Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos.
Technical drawings attached to photos.
Description of ventilation
The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity.
Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C
c. Humidity max 38%.
a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6.
As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state.
Kdodeq H H Ruopfx Acasw
b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air.
c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk.
The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa
The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained.
Technical data attached to the photos.
该广告为自动翻译,可能存在翻译错误。
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2023
1 在线广告
发送询价
电话 & 传真
+48 728 4... 广告
这些广告您可能也感兴趣。
成功
您的消息已发送。
拍卖
结束于
d
h
min
s
拍卖已结束
德国
9,303 km
线切割机床
GF Agie CharmillesROBOFILL 240 SLP
GF Agie CharmillesROBOFILL 240 SLP
成功
您的消息已发送。
小广告
St. Gallen
9,580 km
超声波清洗系统
Ultraschallreinigungsanlage BR-80BR-80-M
Ultraschallreinigungsanlage BR-80BR-80-M
成功
您的消息已发送。
拍卖
结束于
d
h
min
s
拍卖已结束
Baden-Württemberg
9,489 km
型钢剪切机
Peddinghaus210/13
Peddinghaus210/13
成功
您的消息已发送。
拍卖
结束于
d
h
min
s
拍卖已结束
Baden-Württemberg
9,489 km
铣床
MikronWF 31D
MikronWF 31D
成功
您的消息已发送。
小广告
Güglingen
9,513 km
通风装置、空气处理器、大厅冷却
IKGIKL150
IKGIKL150
成功
您的消息已发送。
拍卖
结束于
d
h
min
s
拍卖已结束
Baden-Württemberg
9,489 km
精密镗床
Hauser5
Hauser5
成功
您的消息已发送。
拍卖
结束于
d
h
min
s
拍卖已结束
Baden-Württemberg
9,489 km
自动冲孔机
SchaalSEP 63
SchaalSEP 63
成功
您的消息已发送。
小广告
Skarżysko-Kamienna
8,654 km
车架式烤箱
Romer PolandSL
Romer PolandSL
成功
您的消息已发送。
拍卖
结束于
d
h
min
s
拍卖已结束
Baden-Württemberg
9,489 km
液压机
Hans SchoenSH/LF100
Hans SchoenSH/LF100
成功
您的消息已发送。
拍卖
结束于
d
h
min
s
拍卖已结束
Baden-Württemberg
9,489 km
批量分度转台
Rundteiltische
Rundteiltische
成功
您的消息已发送。
小广告
Dortmund
9,461 km
燃气式预热炉
VEI-EngineeringVEI_KO_V_GB_400-350
VEI-EngineeringVEI_KO_V_GB_400-350
成功
您的消息已发送。
拍卖
结束于
d
h
min
s
拍卖已结束
Baden-Württemberg
9,489 km
长皮带砂光机
KuhlmeyerEBS21
KuhlmeyerEBS21
成功
您的消息已发送。
拍卖
结束于
d
h
min
s
拍卖已结束
Baden-Württemberg
9,489 km
板材校正机
Blechtrichtmaschine
Blechtrichtmaschine
成功
您的消息已发送。
小广告
Hradec Králové
9,022 km
切菜机
Urschel1700
Urschel1700
您的广告已成功删除
发生错误


























































































































































