液压试验压力机

Müller Weingarten ZE 1000-30

Technical data:

FORCES
Ram force: 10,000 kN
Ram return force: 1,000 kN
Ram cushion force: 2,000 kN
Drawing cushion force (blank holder): 4,000 kN

STROKES
Ram stroke: 1,400 mm
Ram cushion stroke: 200 mm
Drawing cushion stroke: 400 mm

Die height (table to ram)
Stroke upper position: 1,800 mm
Stroke lower position: 400 mm

Table size: 3,000 x 1,900 mm
Ram size: 3,000 x 1,900 mm

Clear space between uprights (left/right): approx. 3,040 mm

Table height above floor: 450 mm

Table plate as sliding plate
Sliding direction: front
Sliding travel: 3,000 mm
Sliding speed: 0.5 - 6 m/min
Load capacity: 20 t

Table and ram deflection at F=max.
2/3 surface load: 0.125 mm/m

Drawing cushion size: 2,450 x 1,550 mm

Drawing cushion hole pattern
Iedpfx Aoxpctcof Aoih
From left to right: 17 rows = 16 spaces at 150 mm each
From front to back: 11 rows = 10 spaces at 150 mm each

Ram cushion size: 2,450 x 1,550 mm

Ram cushion hole pattern
From left to right: 17 rows = 16 spaces at 150 mm each
From front to back: 11 rows = 10 spaces at 150 mm each

Height above floor: approx. 7,700 mm
Weight, static: approx. 160,000 kg
Installed power, total: approx. 265 kW
Drive power (main drives, 2 x 110 kW): 220 kW

SPEEDS
Ram
Rapid down speed: approx. 600 mm/s
Working speed max. up to 2,500 kN: approx. 37 mm/s
Working speed F max.: approx. 16 mm/s
Return speed: approx. 430 mm/s
Die spotting speed: approx. ≤ 10 mm/s

The above information is taken from the machine documentation. The seller accepts no liability for completeness or accuracy. The actual technical data and functions of the machine are decisive.

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。