滚压成型生产线

LLC Evolutioner with punch option Metal roof snap lock machine SLP-1 auto

Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels.

After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes.

As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel.
Specifications:
Dimensions (mm):
rolling machine 3000x1400x900
guillotine shears 400x1120x1130
Weight (kg):
rolling machine 643
Lasdpfx Afouzv Tzo Aeh
guillotine shears: 110
Drive power:
rolling machine: 1.5 kW, 220V (or 380V on request)
guillotine shears: 1.1kW
Maximum thickness of sheet metal (mm): 0.6-0.7mm
Workpiece Width (mm): 250-700
Rolling speed (m/min): up to 10

Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation.

SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation.
As additional options metal roof panel roll forming machine SLP-1 auto can have:
Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material;
Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel;
Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching.
Metal unwinder (can be floor-standing, manual console, automatic console).