冷室压铸生产线（未使用）

LK Machinery Impress Plus DCC 3500

Installed and commissioned with dry, test run only.

- Two‑platen machine
- Max locking force: 35,000kN
- Injection force: Approx. 390–420kN (varies by plunger size)
- Plunger diameter: Ø130mm
- Plunger stroke: 950mm
- Shot weight (Al): 6.5–8.5kg, depending on plunger
- Projected area at 400 bar: 8,750–9,000cm² (calculated from 35,000kN clamping force)
- Platen size (H × W): 3100× 3100mm
- Distance between tie bars (H × W): 1950×1950mm
- Die height (min / max): 900/1350mm
- Die opening stroke: 1200mm

Støtek melting system with
- Støtek SMG 3.0_7.0 two chamber gas fired melting shaft furnace with ingot charging elevator, furnace melting capacity approx. 1.5t/h
- Støtek DTI 6020 holding furnace with Fuco-Heg MBS 2000 molten metal treatment/rinsing station
- Støtek AMET 1700 dosing furnace

LK Impress Plus DCC 3500 die casting machine with
- Siemens PLC S7-1500 controls
- ABB IRB 6650S die release agent spray robot
Bcedpfx Asygxr Rog Seu
- Wollin OSA 15-2-C die release agent supply system and spray head
- AED 181-080 die lubrication dilution system
- Fondarex Highvac Premium 2C 200 die casting vacuum system with air tank and vacuum pumps
- 5x IECI PFN 330 2-Z oil temperature control units
- 5x IECI PF-ZH 1802-Z water temperature control units
- KMA Ultravent UV 20000EE fume extraction and filter system
- ABB IRB 7600 robot for die casting machine unload, trim press load/unload and cooling station load
- LK WB-100 1,000kN trim press with trim conveyor
- ABB robot for cooling station unload, laser marking and outfeed
- Keyence MD-X 1500C 3 axis laser marking system
- Outfeed conveyor with cooling tunnel

A quantity of spare parts is available with the line.