洗车

LCT T 600

Sale of an LCT T 600 demonstration pass-through washing system from 2024 at a special price
Zones of the pass-through washing system:
Zone 1: Main washing zone:
Length: approx. 2600 mm
Pump: 7.5 kW, 60 cbm/h
Tank capacity: approx. 400 l
Water heated with 3 electric screw-in heaters each 10 kW
Operating washing temperature: approx. 60° C
Zone 2: Rinse zone
Length: approx. 2200 mm
Pump: 3 kW, 33 cbm/h at 3 bar
Tank capacity: approx. 350 l
Water heated with 2 electric screw-in heaters each 10 kW
Operating washing temperature: approx. 60° C
Zone 3: Hot air drying zone:
This serves for all-around mechanical air blowing (from below, the sides, and above) of the water droplets located on the surface of the washed goods, which are blown off by air knives and built-in high-pressure fans.
The conveyor belt is equipped with a plastic belt.
The frame is made of stainless steel 1.4301, has its own drive, and is controlled via the system’s PLC control.
Iedpfswpq Evox Abdjhw
The conveyor belt brings the washed goods out of the machine, makes a 90° curve to the left, and then conveys the goods towards the machine entrance (where the items to be washed are placed on the machine).
There are 3 photoelectric sensors at different points on the conveyor belt, equipped with special holders and mutually facing reflectors on the stainless steel structure. Belt width 400 mm / height up to 400 mm
(At the beginning – 1 sensor before the curve, 1 sensor at the end, and 1 sensor approx. 2 m before the end) is a buffer zone (1-2 m long).
As soon as the buffer zone is filled with returning washed goods, the machine and the conveyor belt stop automatically.

该广告为自动翻译，可能存在翻译错误。