锻造压力机LASCO
SKP 2500
锻造压力机
LASCO
SKP 2500
出厂年份
1983
状况
二手
位置
Kehl 

显示图片
显示地图
价格和位置
- 位置:
- Lager Kehl

拨打
优惠详情
- 广告编号:
- A21621088
- 参考编号:
- 1050-073066
- 更新:
- 最近更新时间为 30.03.2026
描述
nominal force 2500 t
stroke 600 mm
cycle time 13 - 18 s
distance between columns 1720 mm
Gsdpoyx Inaefx Ag Ueua
Distance table/ram, max. stroke up, adjustment up 2600 mm
table surface area 1720 x 1800 mm
allowed max. force 4000 t
blow die to die 5000 t
ram surface 2100 x 1320 mm
capacity of ejector in table 40 t
ejector stroke in table 250 mm
ejector surface area in table 900 x 820 mm
capacity of ejector in ram 6 t
ejector stroke in ram 40 mm
spindle diameter 425 mm
power requirement 900,0 kW
weight 335,0 t
Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m
height over floor 8,3 m
fully automated forging line / spindle press with automation for the production of flanged shafts
for hot forming only
with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication
cycle time approx. 13 - 18 s
as is where is, WITHOUT putting into operation
stroke 600 mm
cycle time 13 - 18 s
distance between columns 1720 mm
Gsdpoyx Inaefx Ag Ueua
Distance table/ram, max. stroke up, adjustment up 2600 mm
table surface area 1720 x 1800 mm
allowed max. force 4000 t
blow die to die 5000 t
ram surface 2100 x 1320 mm
capacity of ejector in table 40 t
ejector stroke in table 250 mm
ejector surface area in table 900 x 820 mm
capacity of ejector in ram 6 t
ejector stroke in ram 40 mm
spindle diameter 425 mm
power requirement 900,0 kW
weight 335,0 t
Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m
height over floor 8,3 m
fully automated forging line / spindle press with automation for the production of flanged shafts
for hot forming only
with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication
cycle time approx. 13 - 18 s
as is where is, WITHOUT putting into operation
发送询价
电话 & 传真
+49 7161 ... 广告
这些广告您可能也感兴趣。
小广告
București
8,567 km
锻造压力机
ErfurtPKe 500/1000
ErfurtPKe 500/1000
小广告
Sofia
8,846 km
双连杆修边机
Progresul, RomaniaPMDv 400
Progresul, RomaniaPMDv 400
您的广告已成功删除
发生错误
























