封边机粘合高度可达 100 毫米

Lange Maschinenbau B 70 K-100

Used machine

Year of manufacture: 2018

Special feature: Machine for up to 100 mm edge height!

Condition: Factory-inspected by Lange Maschinenbau

Equipment and technical data:

- Machine table with 13 running rollers for improved workpiece guidance
- Edge feeding, synchronous with belt feed
- Edge thickness adjustable via digital counter
- Pneumatic roller separation with knife (for cuttable edges)
- Three pressure rollers
- Belt feed:
- 0.25 kW
- approx. 1250 mm long
- approx. 6.0 m/min
- 50 mm wide toothed belt with thick, workpiece-friendly rubber top
- Digital counter for height adjustment
- Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill
Ncjdpfxewka S Is Abwjn
- Flush cutting unit:
- for front and rear workpiece edges
- automatic sensing at the workpiece
- pneumatic cutting with knife for cuttable edges
- Flush trimming unit
- with vertical sensing and horizontal guidance
- reproducible setting using digital counters
- 2 powerful 0.4 kW high-frequency motors
- stepless speed adjustment from 4000 to 18000 rpm
- Cutter Ø 70 mm, Z4, radius 2 mm/15°
- central extraction nozzle Ø 100 mm
- 2 chip extraction hoods with hose Ø 60 mm
- Automatic height adjustment of the upper cutter with belt feed
- Continuous workpiece support approx. 1800 mm long
- Workpiece support rail, extendable by approx. 300 mm
- Rotatable foil dispenser Ø: 800 mm
- Workpiece width: min. approx. 80 mm
- Workpiece thickness: 10 – 100 mm
- Workpiece length: min. approx. 220 mm
- Edge thickness: 0.4 – 2.0 mm
- Roller separation: max. 1.0 x 55 mm, 2 x 45 mm
- Glue pot heating capacity: 2.7 kW
- Heat-up time: approx. 10 minutes
- Working height: approx. 880 mm
- Electrical connection: 400V, 50 Hz, 3Ph + N
- Total connected load: 3.8 kW
- Pneumatic connection: 6 Bar

Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm

Weight: approx. 260 kg

Availability: short-term

Location: Flörsheim

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。