断头台剪

LAMI NOVA SL 3012

Max. cutting length 3050 mm
Material thickness 37 kg/mm² 12 mm
Material thickness 70 kg/mm² 8 mm
Cutting angle 1.8 degrees
Stroke rate 8 - 13 min.
Number of hold-down clamps 12
Drive power 18.5 kW
Dimensions L x W x H 4150 x 1950 x 1950 mm
Weight 8000 kg

Accessories / Special features:
• ELGO Type 71 motorized NC positioning control
for the backgauge, length approx. 900 mm
• If necessary, the toggle lever system allows the machine to operate with only one cylinder at a reduced cutting capacity of approximately 55% of the nominal capacity. This simultaneously increases the cutting sequence for more efficient work with thin sheet metal. Switching from fast to slow is done using a selector switch on the control panel.
• Hydro-mechanical drive via a powerful toggle lever
• Easy cutting gap adjustment on both sides
• 2 cylinders mounted externally on the machine, easily accessible
• Vertical, stable guides
• Upper and lower blades each with 4 cutting edges
• Hydraulic overload protection
• Proportional force of the hold-down clamps
• The machine frame is a fully welded construction and is machined in one setup (no screwed parts)
• Portable electric foot switch
• Blades suitable for black sheet metal and stainless steel
Djdpfx Aovkw Dvshvjcd
• Ball transfer units in the table
• 1 angle stop
• 1 support arm
• CE-compliant

Siegfried Volz Machine Tools
Rüschebrinkstr. 151-153
DE - 44143 Dortmund - Wambel

该广告为自动翻译，可能存在翻译错误。