加工中心

KIHEUNG Combi T 1100 RT

CNC traveling column milling center with rotary table and 1° x 1° automatic milling head (ISO 50) with 5,000 rpm

Assembly, alignment and commissioning possible!

TECHNICAL DETAILS
Control: HEIDENHAIN TNC 640, HSCI
X-axis: 2,500 mm
Y-axis: 1,400 mm
Z-axis: 1,400 mm
Table size (L x W): 1,600 x 1,400 mm
T-slots (number): 9 pieces
T-slots (width): 22 mm
T-slots (spacing): 125 mm
Max. table load: 5,000 kg

spindle
Tool holder: DIN 69871 50 ISO
Spindle speeds: 0 - 5,000 rpm

Feed and rapid traverse
Feed speed (X/Y/Z): 10 m/min
Rapid traverse (X/Y/Z): 25 m/min

tool changer
Number of tool stations: 60
max. tool diameter: 125 / 250 mm
max. tool length: 350 mm
Max. tool weight: 20 kg

MACHINE DETAILS
Main drive engine power: 24 / 28 kW
Machine weight: 16,000 kg
Control on: 229 min / approx. 4 h
Machine on: 2073 min / approx. 35 h
Spindle running time: 334 min / approx. 6 h
Program run: 877 min / approx. 15 h

EQUIPMENT
- Main computer MC 7522
- Software: rotary table machining, coordinate conversions, swiveling of the
Machining plane, interpolation - circle in 3 axes
- MONTRONIX machine protection: crash detection, overload detection, black box
- portable, electronic handwheel HEIDENHAIN HR 510
- 3 SIEMENS AC servo feed motors
- Linear measuring system via HEIDENHAIN measuring rods with compressed air system DA 400
- Universal automatic milling head K5; 5,000 rpm / 1.0° x 1.0° - bi-rotating
- horizontal chain tool changer for 60 places including spindle orientation
- HEIDENHAIN workpiece measuring system TS460, transmission via infrared and radio
- Transmitter and receiver unit HEIDENHAIN SE 660
- Cooling through the spindle 16 bar with paper filter including cooling water spray gun with separate pump 9 bar
- Air through the spindle, max. 10 bar, controlled via M-function and soft key on the control keyboard
- Spindle orientation for rigid thread cutting
- Head and ZF transmission cooling
- Precision ball screws in all axes
- Hydraulic weight compensation in the Z-axis PARKER
- Chip conveyor system with 1 rear hinge conveyor
- Telescopic guide covers in all 3 axes
- Cone blow-out device via M-function
- automatic central lubrication DROPSA
- Coolant device, max. 8 bar via nozzle row, pressure adjustable by frequency control.
- Compressed air via nozzle ring via M-function
- automatic blow-out unit of the cone - A2 + A4 head
- Automatic power off via M function
- RITTAL control cabinet with RITTAL air conditioning and lighting
- Work lighting
- Central machine operation on the control panel
- 5 pull studs

DOCUMENTATION
- Operating instructions
- Programming instructions
- Maintenance instructions
- Lubrication instructions
- Electrical circuit diagrams
- CE declaration of conformity