外圆磨床Karstens
K11 650
外圆磨床
Karstens
K11 650
製造年份
1988
狀況
二手
位置
Heroldstatt 

顯示圖片
显示地图
价格和位置
- 位置:
- Lange Straße 142-144, 72535 Heroldstatt, DE
撥打
优惠详情
- 產品ID:
- A7216755
- 最後更新:
- 於 18.09.2025
描述
Karstens K11 650
The cylindrical grinding machine was completely overhauled at PS-Karstens.
The machine is checked and in a very good condition.
Since we are specialized in Karstens cylindrical grinding machines, we can offer you the complete service (electrical and mechanical) for the machine after purchase.
Technical data:
Center width: 650 mm
Laodpfxoh Rixxs Af Ash
center height: 180 mm
workpiece weight: 100 kg flying, 250 kg between centers
grinding wheel diameter: 400 mm
workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 °
tailstock: MK4, quill stroke 45 mm, cylinder fine adjustment
quill force: 200-600 N, hydraulically operated via foot pedal
table inclination: 10 degrees
feed spindle adjustment travel: 80 mm
rapid traverse path: 50 mm
Coarse adjustment air cushion: 280 mm
grinding spindle motor outside: 4 KW
grinding spindle motor inside: 2,2 KW
workpiece spindle motor: 0,55 KW
Machine weight: Net 3800 Kg
Infeed drive via DC motor
Air cushion-supported quick adjustment of the grinding headstock
for fast and safe approach of the grinding position.
Separate drive for the spindles for external and internal grinding.
Fully automatic work sequence, infeed movement via wind rose switch:
Fast forward, fast reverse, grinding mode, infeed stop, mym infeed.
Automatic longitudinal grinding cycle
Central coolant supply for all grinding points
Work headstock with infinitely variable drive with travelling and lockable spindle.
Infeed control for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts,
feeds, burnout times, empty strokes
Paper belt filter automat approx. 250 L
similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
The cylindrical grinding machine was completely overhauled at PS-Karstens.
The machine is checked and in a very good condition.
Since we are specialized in Karstens cylindrical grinding machines, we can offer you the complete service (electrical and mechanical) for the machine after purchase.
Technical data:
Center width: 650 mm
Laodpfxoh Rixxs Af Ash
center height: 180 mm
workpiece weight: 100 kg flying, 250 kg between centers
grinding wheel diameter: 400 mm
workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 °
tailstock: MK4, quill stroke 45 mm, cylinder fine adjustment
quill force: 200-600 N, hydraulically operated via foot pedal
table inclination: 10 degrees
feed spindle adjustment travel: 80 mm
rapid traverse path: 50 mm
Coarse adjustment air cushion: 280 mm
grinding spindle motor outside: 4 KW
grinding spindle motor inside: 2,2 KW
workpiece spindle motor: 0,55 KW
Machine weight: Net 3800 Kg
Infeed drive via DC motor
Air cushion-supported quick adjustment of the grinding headstock
for fast and safe approach of the grinding position.
Separate drive for the spindles for external and internal grinding.
Fully automatic work sequence, infeed movement via wind rose switch:
Fast forward, fast reverse, grinding mode, infeed stop, mym infeed.
Automatic longitudinal grinding cycle
Central coolant supply for all grinding points
Work headstock with infinitely variable drive with travelling and lockable spindle.
Infeed control for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts,
feeds, burnout times, empty strokes
Paper belt filter automat approx. 250 L
similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
这些广告您可能也感兴趣。
小广告

9,506 km
外圆磨床
Karstens Premium RetrofitK11 650
Karstens Premium RetrofitK11 650
拍卖
拍賣已結束

9,500 km
外圆磨床
KarstensK11-650
KarstensK11-650
小广告

9,506 km
外圆磨床
Karstens Premium RetrofitK11 650
Karstens Premium RetrofitK11 650
拍卖
拍賣已結束

9,500 km
外圆磨床
KarstensK11 650
KarstensK11 650
您的广告已成功删除
发生错误