作业平台半挂车

KÖGEL Multi Chassis, verstärkt

You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.

Excerpt from the equipment list. Complete equipment list available upon request.

Chassis:
* Regular ladder frame in lightweight steel construction with continuous crossmembers
* With extended chassis frame
* Coupling plate approx. 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337
* Axle lift mechanism on axle 1
* Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, offset 120
* Air suspension with approx. 180 mm travel

Tires:
* Wheels with internal sensors according to UN ECE R141
* Tires 6x 385/65 R 22.5 UNIROYAL TH 506, steel rims 22.5 x 11.75, offset approx. 120 mm
*

Chassis components:
* Mechanical landing gear with leveling foot, approx. 24 t lifting capacity, single-sided operation on the right side
* Storage box for: 10 side panels, folding stakes, and rear flap, completely enclosed, protected against spray water, and simultaneously serving as lateral protection
* 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm, mounted at the rear, 1x left and 1x right

Braking / Air Suspension System:
* EBS system 2S/2M with stability program (includes ABS/ALB function)
* EBS connector ISO 7638 (without connecting lines)
* Parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 connector
* WABCO EBS system
* Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit
* Driving position is automatically adjusted
* 2 non-interchangeable coupling heads at the front ISO 1728
* Air tanks for braking system and air reserve made of steel (EN 286-2)

Floor:
* Plate floor approx. 30 mm thick, multiple-ply glued plywood
* Floor sealed around the perimeter
* Pocket for square tube inserts approx. 80 x 80 mm

Front wall:
* Storage for max. 14 square tube inserts approx. 80 x 80 (length 1,990 mm) on the inside of the front wall
* Approx. 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame
* 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640
* N o t e: When using the front wall for securing the load, suitable lashing straps must be used for tensioning if the vehicle is operated without side panels and a rear flap

Rear wall:
* ATTENTION: Hinge mount for folding rear wall 600 mm as well as stake mount for folding corner stakes at the rear, however, the folding rear wall and corner stakes at the rear are OMITTED.

Side wall:
* VarioFix steel outer frame, 4 pairs of stake mounts for folding stakes on the outer frame (evenly distributed), WITHOUT folding stakes, pair of lashing brackets in the outer frame (according to EN 12640), permissible tensile force approx. 5,000 kg per ring.

Side panels:
* ATTENTION: Hinge mount for 5 pairs of side panels on the outer frame as well as side panel stop mounted on the corner posts at the front, however, the 5 pairs of side panels are OMITTED.

Electrical system / Electronics:
* Lamp carrier made of steel, arranged above the underrun protection
Kedpfx Asy Trwuentjlt
* KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED marker lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the lights
* 2 LED outline lights with pendulum bracket
* 2 multi-chamber tail lights
*

该广告为自动翻译，可能存在翻译错误。