心轴式弯管机Jutec Biegesysteme GmbH & Co. KG
Biegesystem 5000
心轴式弯管机
Jutec Biegesysteme GmbH & Co. KG
Biegesystem 5000
出厂年份
2025
状况
全新
(完全功能)
位置
Limburg an der Lahn 

基本数据
价格和位置
- 出租:
- 可能
- 位置:
- Robert-Bosch-Straße 8, 65549 Limburg an der Lahn, Deutschland

拨打
技术细节
设备
脚部遥控器
集中润滑系统
快换装置
安全特性
紧急停止
文件和认证
保修期限:
24 个月
CE标志
可加工材料/产品
管道直径(最大):
54 毫米
管道长度(最大):
6,000 毫米
更多详细信息
弯曲角度(最大):
195 °
弯曲半径(最大):
250 毫米
压力(最大):
250 横杆
控制类型:
PLC 控制
驱动类型:
电动
最小弯曲半径:
9 毫米
管壁厚度(最大):
4 毫米
优惠详情
- 广告编号:
- A11644613
- 更新:
- 最近更新时间为 21.05.2026
描述
THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII:
The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production.
Iedpfendn Agox Ah Asii
The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values.
The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending.
This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached.
The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine.
POSSIBLE APPLICATIONS:
Hydraulic piping
Pipeline construction
Plant construction, e.g. chemical industry
Metal construction
Sample construction
Technical data:
Bending capacity Ø 6 to 50 x 4 mm depending on material
bending radius min/max: 10 mm/140 mm
Bending radius min: 1,5 x Ø (standard 2 x Ø)
Multifunctional machine control Bending angle adjustment (0.1°)
Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer)
Maximum 180º bending result
Weight 600-700 kg (depending on version)
Ergonomic operation via safety foot switch
OPTIONAL ACCESSORIES:
Automatic mandrel lubrication (minimum quantity)
Pneumatic or hydraulic quick-action chuck
Positioning of length and torsion via automatic brake function or via manual stops by foot switch
Semi-automatic positioning of length and rotation via servo motors
Pneumatic rotation stop
Pipe calculation software
Laser-supported tool monitoring for monitoring the tool tension
10 inch touch screen with integrated tube calculation
Bending radius up to 250 mm
Data transfer via cable (LAN), wireless (WLAN) or USB
OUR SERVICE:
- Welcome to the test production in our house in the demo room
- Consultation and information meeting at your site
- Consultation and handling as leasing/financing-purchase via
the company JUTEC
- Service contracts, maintenance at your site
The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production.
Iedpfendn Agox Ah Asii
The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values.
The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending.
This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached.
The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine.
POSSIBLE APPLICATIONS:
Hydraulic piping
Pipeline construction
Plant construction, e.g. chemical industry
Metal construction
Sample construction
Technical data:
Bending capacity Ø 6 to 50 x 4 mm depending on material
bending radius min/max: 10 mm/140 mm
Bending radius min: 1,5 x Ø (standard 2 x Ø)
Multifunctional machine control Bending angle adjustment (0.1°)
Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer)
Maximum 180º bending result
Weight 600-700 kg (depending on version)
Ergonomic operation via safety foot switch
OPTIONAL ACCESSORIES:
Automatic mandrel lubrication (minimum quantity)
Pneumatic or hydraulic quick-action chuck
Positioning of length and torsion via automatic brake function or via manual stops by foot switch
Semi-automatic positioning of length and rotation via servo motors
Pneumatic rotation stop
Pipe calculation software
Laser-supported tool monitoring for monitoring the tool tension
10 inch touch screen with integrated tube calculation
Bending radius up to 250 mm
Data transfer via cable (LAN), wireless (WLAN) or USB
OUR SERVICE:
- Welcome to the test production in our house in the demo room
- Consultation and information meeting at your site
- Consultation and handling as leasing/financing-purchase via
the company JUTEC
- Service contracts, maintenance at your site
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2023
10 在线广告
发送询价
电话 & 传真
+49 6431 ... 广告
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
Limburg an der Lahn
9,492 km
心轴式弯管机
Jutec Biegesysteme GmbH & Co. KGDornbiegemaschine Biegesystem 5000S
Jutec Biegesysteme GmbH & Co. KGDornbiegemaschine Biegesystem 5000S
成功
您的消息已发送。
小广告
Fuldatal
9,345 km
折弯机
JUTEC6000D
JUTEC6000D
成功
您的消息已发送。
小广告
Hessisch Lichtenau
9,345 km
轨道焊接机用逆变电源,焊接设备+水冷,轨道焊接设备 -
MESSER GRIESHEIM - POLYSOUDEPS 204 + RC 200
MESSER GRIESHEIM - POLYSOUDEPS 204 + RC 200
成功
您的消息已发送。
小广告
Ennepetal
9,482 km
振动研磨机
GERD WOLFFVKUE 350
GERD WOLFFVKUE 350
成功
您的消息已发送。
小广告
Mudersbach
9,471 km
三辊折弯机
FastechFRM 1050 x 90
FastechFRM 1050 x 90
成功
您的消息已发送。
小广告
Rödermark
9,470 km
电工水利联合大学弯曲中心
INDUMASCHV 15
INDUMASCHV 15
成功
您的消息已发送。
小广告
Hessisch Lichtenau
9,345 km
带有 HEIDENHAIN TNC 155 数控系统的数控通用坐标钻铣床,钻床,铣床
FEHLMANNPICOMAX 100-CNC 3
FEHLMANNPICOMAX 100-CNC 3
成功
您的消息已发送。
小广告
Saerbeck
9,411 km
激光切割机
DURMAVORFÜHRLASER HD-FN 3015 12 kW
DURMAVORFÜHRLASER HD-FN 3015 12 kW
成功
您的消息已发送。
小广告
İstanbul
8,474 km
激光切割机
BodorBodor C3
BodorBodor C3
成功
您的消息已发送。
小广告
Bitburg
9,610 km
焊接烟尘提取
SchweisskraftSRF Master
SchweisskraftSRF Master
您的广告已成功删除
发生错误










































































































