电加热不锈钢储罐Inox Behälter GmbH
EBB1150RWP
电加热不锈钢储罐
Inox Behälter GmbH
EBB1150RWP
固定价格 不包含增值稅
€14,550
狀況
全新
位置
Delmenhorst 

顯示圖片
显示地图
机器数据
价格和位置
固定价格 不包含增值稅
€14,550
- 位置:
- Steller Straße 65, 27755 Delmenhorst, DE
撥打
优惠详情
- 產品ID:
- A19649271
- 參考編號:
- EBB1150RWP
- 最後更新:
- 於 25.07.2025
描述
Factory-new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity.
Type: EBB1150RWP
Also available with alternative agitators and in other sizes.
Volume: 1150L
Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm
External Ø: 1390mm
Kodpfow Dy D Dsx Af Ajdu
Total height: approx. 1300mm plus agitator drive
Material: 1.4301 / AISI304 stainless steel
Surface: IIIc/IIId / satin finish
Internal welds ground smooth
Max. operating temperature: 110°C
Max. operating pressure: atmospheric
- Upright design on four tubular legs with forklift channels
- Top: Central traverse with two hinged covers
- Bottom: Flat sloped base with lateral outlet DN50 DIN11851 and butterfly valve, EPDM gasket
- Insulation: 50mm mineral wool around the cylinder, hermetically welded stainless steel 1.4301 cladding
Equipment:
1x Top traverse with two hinged cover halves, clamp function for the lid
Stainless steel grating below the hinged lid, bolted and removable
1x Agitator flange on the top
1x Inlet port DN50 DIN11851 on the top
1x Outlet fitting with butterfly valve DN50 DIN11851, EPDM gasket
1x nameplate
Propeller agitator for low-viscosity media
Power: 0.75 kW
Speed: 1410 rpm
Operating voltage: 3PH 400V
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
Type: EBB1150RWP
Also available with alternative agitators and in other sizes.
Volume: 1150L
Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm
External Ø: 1390mm
Kodpfow Dy D Dsx Af Ajdu
Total height: approx. 1300mm plus agitator drive
Material: 1.4301 / AISI304 stainless steel
Surface: IIIc/IIId / satin finish
Internal welds ground smooth
Max. operating temperature: 110°C
Max. operating pressure: atmospheric
- Upright design on four tubular legs with forklift channels
- Top: Central traverse with two hinged covers
- Bottom: Flat sloped base with lateral outlet DN50 DIN11851 and butterfly valve, EPDM gasket
- Insulation: 50mm mineral wool around the cylinder, hermetically welded stainless steel 1.4301 cladding
Equipment:
1x Top traverse with two hinged cover halves, clamp function for the lid
Stainless steel grating below the hinged lid, bolted and removable
1x Agitator flange on the top
1x Inlet port DN50 DIN11851 on the top
1x Outlet fitting with butterfly valve DN50 DIN11851, EPDM gasket
1x nameplate
Propeller agitator for low-viscosity media
Power: 0.75 kW
Speed: 1410 rpm
Operating voltage: 3PH 400V
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
您的广告已成功删除
发生错误