薄膜复合材料红外固化炉

IBT Infra Bio Tech GmbH Infrarot Aushärteofen

Manufacturer
IBT.lnfraBioTech GmbH
Art. No. 3200 0088

Technical Data
Condition: as new; little used from test series
Functionality: fully functional
Year of manufacture: 2018
Connected load: 58 kW
Cooling capacity, water connection on site: 30 kW
Conveyor belt length: 7,000 mm
Conveyor belt width: 310 mm
Infeed height: 55 mm
Infeed width: 1,460 mm


TECHNICAL DETAILS
Usage: Continuous oven for curing in film bonding technology
Component temperature: max. 100°C
Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm
Dsdownm Ukepfx Ab Neku
Total height without control cabinet: 2000 mm
Control cabinet (WxDxH): 1200 x 600 x 2100 mm
Base made of stainless steel profile tube, height-adjustable: ± 30 mm

Conveyor system
Vacuum conveyor belt made of silicone, belt 310mm wide
Transport speed: max. 5 m/min
Conveyor belt height: 950 mm ± 30 mm
Openings at belt infeed/outfeed (WxH): 308 x 35 mm
Free zone at belt infeed: approx. 750 mm
Free zone at belt outfeed: approx. 750 mm

Conveyor belt operation:
Continuous, adjustable up to max. 5m/min,
straight running control centered on rollers with light barrier safety at inlet and outlet. Loading and unloading is manual.
 
Intended use
The curing oven is a belt system for continuous operation with a feed speed of up to 5 m/min. There is an open area at the infeed and outfeed for loading and unloading components. Between these areas is the enclosed heating section with 6 IR modules (height-adjustable). The component temperature is a maximum of 100°C and serves to heat solvent-free adhesive between a film composite. The return section of the belt, the backs of the IR modules, and the area above the heating modules are water-cooled. The components are sucked onto the conveyor belt by negative pressure. The control cabinet is located outside the cleanroom, separated from the machine.

The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The system is solely for the heating of a film composite.

Equipment
- 6 adjustable infrared heating modules, each with 6 infrared radiators
- 6 pyrometers for precise temperature control
- PU conveyor belt for efficient material flow
- Integrated control and regulation system
- Height-adjustable stainless steel substructure
- Vacuum conveyor belt
- Cooling water distribution in the subframe (G1")
- Water cooling in the area of the belt return and the backs of the IR modules
- Mechanically lockable service doors
- Control panel mounted on the left side of the infeed
- Control cabinet air conditioner, water connection on site


History
This oven was intended for use in a cleanroom environment and was barely used for a trial series. The oven was used for curing solvent-free adhesives between a film composite.

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。