立式加工中心

HWACHEON Vesta 1000 12K

Technical Data VESTA-1000/12K

Travels
Nwedpox Rzhdofx Af Ssc
Axis travels (X/Y/Z) mm: 1,000 / 550 / 500
Distance table surface – spindle nose mm: 130 – 630
Axis guideways: Linear rolling LM guides

Table
Working surface mm: 1,100 x 502
Maximum load kg: 700
Table configuration mm: 5x T-slots (width 18 mm, pitch 80 mm)

Spindle
Maximum speed rpm: 12,000
Spindle power (10 min / continuous) kW: 18.5 / 11

Feeds
Rapid traverse (X/Y/Z) m/min: 36 / 36 / 30
Working feed (X/Y/Z) mm/min: 1 – 24,000
Feed motor (X/Y/Z) kW: 1.8 / 1.8 / 3.0

Automatic Tool Changer
Tool taper: BT40
Pull stud: MAS P40T-1 (45°)
Number of tool stations pcs: 24
Max. tool diameter mm: Ø 80 / Ø 150 (without adjacent tool)
Max. tool length / weight mm / kg: 300 / 8
Tool-to-tool change time sec: 2.5
Chip-to-chip change time sec: 4.3
Magazine & changer type: Disc magazine with rotary arm

Power Supply
Connected load kVA: 30

Tank Capacities
For spindle lubrication/cooling l: 6 / 20
For coolant l: 380

Machine Dimensions
Height mm: 2,670
Floor space (L x W) mm: 3,335 x 2,200
Weight kg: 6,500

Control System
Fanuc 0i-MD

Standard Equipment
- Spindle air purge
- Machine alignment elements
- Machine protective guarding
- Auger conveyor in working area
- Cooling system
- Safety doors
- Ethernet interface
- CNC system software options by HWACHEON:
- OPTIMA (feedrate optimization)
- HAI (40-block memory, AI nano contour control)
- HTLD (tool load monitoring)
- HTDC (thermal displacement compensation for spindle and machine frame [HTDC=HSDC+HFDC])
- HECC (accuracy or speed preference in machining)
- Centralized lubrication system
- Lubricant oil evacuation to dedicated tank
- Electronic handwheel
- Operating documentation in Czech
- Pneumatic system
- Program capacity: 1,280m (512kb)
- Rigid tapping
- 3-color status signal light
- Spindle jacket cooling
- Air dryer (included)
- Work area lighting
- 10.4" color LCD display
- CE certificate
- Transformer
- Through-spindle coolant 30 bar
- Manual Guide i
- Chip conveyor
- Workpiece and tool probes
- 4th axis direct control by Fanuc CNC system via M-codes (or independent controller usable for another machine)

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。