组装台

Huellinghorst SYSTEMOplan

The flattest wooden frame construction table in the world = 3 cm!
Delivered without wooden panels.

Text, line break
with the following data:
Included components:
- 1 double rail (zero stop)
- 10 perforated rails
- 10 toothed rack tensioners
- 14 adjustable stop blocks
- 14 interchangeable pressure plates, outer wall
- Battery-powered impact wrench
- Bit adapter
- 50 dowels MMS 10x70/5
- Hammer drill 8x165

Dimensions:
Clamping length from 0 to 3,550 mm
Hole spacing 140 mm
Fgsdpfx Adob Nrbnsrod
with panel width 1,250 mm = table length 12,350 mm
max. clamping force approx. 250 kg
Stroke length of tensioner 340 mm
Height of stop blocks 100/160 mm

The frame construction aid was developed to
enable precise manufacturing of wooden frame construction elements.
Particular attention was paid to the space required
and the price. Thanks to the extremely flat design,
it is now possible to use the area differently by
removing the tensioners and stop blocks. This is not
only an advantage for small businesses, but for all
company sizes.

After creating a level surface, the clamping rails are
aligned and anchored to the floor. The spaces in
between are filled with a 30 mm thick wooden panel,
which is to be installed on site. At the edges, ramps
can be attached with the same panel. The resulting
level surface can also be used with heavy vehicles or
as a storage area.
This means that the space for wooden frame construction
can only be activated when needed.
The steel parts are galvanically zinc-coated.

The entire assembly takes place on site.
After adjusting the table, the stops must be pinned
in place, as they could otherwise be adjusted by the
force of the tensioners.
Packed in wooden crates, ready for EU shipping.
Delivery free to your door within Germany.
Made in Germany.

See data sheet for details.

该广告为自动翻译，可能存在翻译错误。